Nss Takes Up To 10 Minutes To Load When The Server Is Rebooted; Identity Manager Plug-Ins Do Not Appear In Imanager; Cluster Connection States - Novell BUSINESS CONTINUITY CLUSTERING 1.2.1 - ADMINISTRATION Administration Manual

13.1 NSS Takes Up to 10 Minutes to Load When
the Server Is Rebooted
In some environments, a timing problem prevents the NDP user space application (
loading, and in turn, NSS cannot be loaded until the problem resolves itself. You can increase the
UDEV event handling limits to 1024 to circumvent this problem. For instructions, see
Up to 10 Minutes to Load When the Server Is Rebooted
Administration
13.2 Identity Manager Plug-Ins Do Not Appear in
iManager
After you properly install Identity Manager plug-ins in iManager, the plug-ins sometime disappear
from iManager for the tree you want to manage.
Identity Manager plug-ins for iManager require that eDirectory
the tree you are trying to manage. If the plug-in does not appear in iManager, make sure that the
eDirectory daemon (
that tree.
To restart
ndsd
prompt as the
rcndsd restart

13.3 Cluster Connection States

The connection state numbers are recorded in a log file that you can use to view connection and
status changes for BCC.
The default path to the log file on Linux is
changed this path from the default. Search for BCCD to view BCC-related messages and entries in
the log file.
There are several different cluster connection states:
Table 13-1
BCC Connection State
Normal
Authenticating
Invalid Credentials
112 BCC 1.2.1: Administration Guide for OES 2 SP2 Linux
Guide.
) is running on the server that contains the eDirectory master replica for
ndsd
on the master replica server, enter the following command at its terminal console
user:
root
BCC Connection States
Number Description
0 The connections between
clusters are functioning
normally.
1 BCC is in the process of
authenticating to a peer
cluster.
2 You entered the wrong
username or password for
the selected peer cluster.
(Linux)" in the
is running and working properly in
TM
. The administrator might have
/var/log/messages
Possible Actions
None required.
Wait until the authentication process
is finished.
Enter the correct username and
password that this cluster will use to
connect to the selected peer cluster.
) from
ndpapp
"NSS Takes
OES 2 SP2: NSS File System