Advertisement
Quick Links
Wireless
R
quick-start guide
ELV+ Dimmer
Welcome—and thank you for purchasing a CasétaR
Wireless ELV+ dimmer. In order to control your lights
from an app or remote, you'll need to purchase a PicoR
remote or Smart bridge
Before you install the dimmer, please watch the
installation video at
www.casetawireless.com/support
We hope you enjoy the convenience of CasétaR Wireless!
Double your warranty
Love CasétaR Wireless dimmers? Have ideas
for making them better? Tell us what you think
and we'll extend your warranty by 1 year.
www.casetawireless.com/register
Contents supplied
ELV+ dimmer (PD-5NE)
Wire connectors (4)
Screws (2)
Tools you'll need
Flat-head screwdriver
Pliers
Phillips-head screwdriver
P/N 0301816 REV A
Advertisement
Related Manuals for Lutron Electronics Caseta PD-5NE-BL
Summary of Contents for Lutron Electronics Caseta PD-5NE-BL
- Page 1 Wireless quick-start guide ELV+ Dimmer Welcome—and thank you for purchasing a CasétaR Wireless ELV+ dimmer. In order to control your lights from an app or remote, you’ll need to purchase a PicoR remote or Smart bridge Before you install the dimmer, please watch the installation video at www.casetawireless.com/support We hope you enjoy the convenience of CasétaR Wireless!
- Page 2 Installing your dimm Installing your dimmer Installation for lights with one wall switch (single pole) Turn power off at circuit breaker! remove existing switch from wall remove side sections (if neces Turn power off at circuit breaker! Bend back and forth. WarNINg: ShOCk hazarD May result in serious injury or death.
- Page 3 remove existing switch from wall Neutral required Ground Ground * If your light has more than one switch (called a 3-way), follow instructions at www.casetawireless.com/3way or watch “Installing CasetaR Wireless in a 3-way switch application” video found at www.casetawireless.com/support.
- Page 4 remove side sections (if necessary) Bend back and forth. Do not remove outside side sections on dimmers at the end of gang. Each dimmer Dimmer at middle has all has inside side side sections removed. sections removed. Important note: Removing side sections reduces the dimmer’s maximum wattage rating.
- Page 5 Connect the dimmer Ground Connect the bare copper (or green) “ground” wire from the wallbox to the green wire on the dimmer using a wire connector. Connect the Load wire from the wallbox to the red wire on the dimmer using a wire connector. Connect the Hot wire from the wallbox to the black wire on the dimmer using a wire connector.
- Page 6 attach the wallplate Attach the adapter to the dimmer using the screws provided and snap on the wallplate. ‘snap’ (If you installed the dimmer next to other dimmers or switches, you’ll need to install a wallplate with the correct size/number of openings to accommodate all the devices.) Turn power on at circuit breaker...
- Page 7 Using your CasétaR Wireless kit Using your CasétaR Wireless kit (sold separately (sold separately) With a smartphone or tablet (Bridge required, sold separately) With a smartphone or tablet (Bridge required, sold separately) The CasétaR Wireless dimmer can be controlled from a smartphone The CasétaR Wireless dimmer can be controlled from a smartphone when used with the LutronR Smart BridgeT.
- Page 8 Without a smartphone or tablet (Bridge not required) Pairing the dimmer and Changing the favorite light level Pico remote control on the PicoR remote control ® (sold separately) or the dimmer Press and hold “off” button on dimmer The round “favorite” button on the PicoR remote control or dimmer can be used to recall favorite light Favorite...
- Page 9 Using your controls Brighter Favorite Darker FASS ™ Front Accessible Service Switch ELV+ dimmer replacing light bulbs using the FaSS Pull the FASS out on the in-wall dimmer to remove power at the light socket. Brighter Favorite Darker Pico remote control (sold separately) ®...
- Page 10 Lutron , Caséta, , and Pico are registered trademarks and Lutron FASS and Smart Bridge are trademarks of Lutron Electronics Co., Inc. NEC is a registered trademark of the National Fire Protection Association, Quincy, Massachusetts. Google and the Google logo are registered trademarks of Google Inc., used with permission.
- Page 11 ** When using MLV loads the dimmer must be switched to forward phase. Follow the instructions www.casetawireless.com/change_phase. Transformers need to be derated to 75% of rating. Contact fixture manufacturer for actual values. Lutron Electronics Co., Inc. 7200 Suter Road Coopersburg, PA 18036-1299, U.S.A.
Need help?
Do you have a question about the Caseta PD-5NE-BL and is the answer not in the manual?
Questions and answers