Lutron Electronics Caseta DVRF-AS Advanced Installation Manual

Hide thumbs

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

Table of Contents

Quick Links

Wireless

by Lutron

Advanced Installation Guide

Dimmer &

ELV+ Dimmer

PRO dimmer

PD-5NE

PD-6WCL/PD-10NXD

Caséta Diva Smart

Caséta Claro

Dimmer DVRF-6L

and

Smart Switch

Diva Smart ELV+

DVRF-5NS

Dimmer DVRF-5NE

Thank you for purchasing Caséta Wireless from Lutron. This document will guide you through several additional

installation topics beyond those covered in the quick-start guide included with your product.

Table of Contents

3-Way Installation -

With a Pico Remote Control

Dimmer with Pico Remote Control

Switch with Pico Remote Control (PD-5WS-DV):

PRO Dimmer with Pico Remote Control (PD-10NXD):

Neutral Switch with Pico Remote Control (PD-5ANS / PD-6ANS):

ELV+ Dimmer with Pico Remote Control (PD-5NE):

Fan Control with Pico Remote Control (PD-FSQN):

Diva Smart Dimmer with Pico Remote Control (DVRF-6L):

Diva Smart ELV+ Dimmer with Pico Remote Control (DVRF-5NE):

Claro Smart Switch with Pico Remote Control (DVRF-5NS):

With a Mechanical Toggle Switch

Switch with Mechanical Toggle Switch (PD-5WS-DV):

PRO Dimmer with Mechanical Toggle Switch (PD-10NXD):

Neutral Switch with Mechanical Toggle Switch (PD-5ANS / PD-6ANS):

Diva Smart Dimmer with Mechanical Toggle Switch (DVRF-6L):

Diva Smart ELV+ Dimmer with Mechanical Toggle Switch

Claro Smart Switch with Mechanical Toggle Switch (DVRF-5NS):

With a Wired Accessory

Diva Smart Dimmer with a Claro Smart Accessory Switch (DVRF-6L/DVRF-AS):

Diva Smart ELV+ Dimmer with a Claro Smart Accessory Switch

Claro Smart Switch with a Claro Smart Accessory Switch (DVRF-5NS/DVRF-AS):

Multi-Location Installation

With a Pico Remote Control

Dimmer with Pico Remote Controls (PD-6WCL):

PRO Dimmer with Pico Remote Controls (PD-10NXD):

Switch with Pico Remote Controls (PD-5WS-DV):

Neutral Switch with Pico Remote Controls (PD-5ANS / PD-6ANS):

ELV+ Dimmer with Pico Remote Controls (PD-5NE):

Fan Control with Pico Remote Controls (PD-FSQN):

Diva Smart Dimmer with Pico Remote Controls (DVRF-6L):

Diva Smart ELV+ Dimmer with Pico Remote Controls

Claro Smart Switch with Pico Remote Controls (DVRF-5NS):

Plug-in

lamp dimmer

PD-3PCL

Caséta Claro Smart

Accessory Switch

DVRF-AS

If you have two switches controlling your lights, follow this procedure to install your dimmer or switch

(PD-6WCL): ............................................................................................................ Page 3 - 6

.......................................................................................................... Page 7 - 10

- If you have three or more switches controlling your lights, follow this procedure to

install your dimmer or switch

.......................................................................................................... Page 74 - 78

Switch

PD-5WS-DV /

PD-5ANS / PD-6ANS

................................................................................................. Page 11 - 14

.............................................................................. Page 15 - 18

..................................................................................................... Page 19 - 22

..................................................................................................... Page 23 - 26

......................................................................................... Page 27 - 30

............................................................................ Page 31 - 34

...................................................................................... Page 35 - 38

................................................................................................ Page 39 - 41

........................................................................................ Page 42 - 45

..................................................................... Page 46 - 49

................................................................................ Page 50 - 53

(DVRF-5NE): ................................................................... Page 54 - 57

............................................................................. Page 58 - 61

(DVRF-5NE/DVRF-AS): ....................................... Page 66 - 69

............................................................................................... Page 79 - 83

........................................................................................................ Page 84 - 88

............................................................................ Page 89 - 93

................................................................................................... Page 94 - 98

................................................................................................... Page 99 - 103

........................................................................................ Page 104 - 108

(DVRF-5NE): .......................................................................... Page 109 - 113

..................................................................................... Page 114 - 118

Fan Control

PD-FSQN

.................................................... Page 62 - 65

................................................. Page 70 - 73

(continued on next page)

0301710o 06/2024

Motion Sensor

PD-OSENS /

PD-VSENS

Table of Contents

Need help?

Do you have a question about the Caseta DVRF-AS and is the answer not in the manual?

Questions and answers

Summary of Contents for Lutron Electronics Caseta DVRF-AS

Page 1 Wireless 0301710o 06/2024 by Lutron Advanced Installation Guide Advanced Installation Guide Dimmer & ELV+ Dimmer Plug-in Switch Fan Control Motion Sensor PRO dimmer PD-5NE lamp dimmer PD-5WS-DV / PD-FSQN PD-OSENS / PD-6WCL/PD-10NXD PD-3PCL PD-VSENS PD-5ANS / PD-6ANS Caséta Diva Smart Caséta Claro Caséta Claro Smart Dimmer DVRF-6L...
Page 2: Table Of Contents
by Lutron Table of Contents (continued) Multi-Location Installation - If you have three or more switches controlling your lights, follow this procedure to (continued) install your dimmer or switch With a Wired Accessory Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L / DVRF-AS): ............
Page 3 by Lutron 3-Way Installation - Caséta Wireless Dimmer with Pico Remote Control (PD-6WCL) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 4 by Lutron 3-Way Installation - Caséta Wireless Dimmer with Pico Remote Control (PD-6WCL) Remove side sections (if necessary) Mount the Caséta Wireless dimmer When installing more than one Caséta Wireless dimmer in the same Location 1 wallbox, it is necessary to remove inner side sections prior to wiring. See image and chart below for more information.
Page 5 by Lutron 3-Way Installation - Caséta Wireless Dimmer with Pico Remote Control (PD-6WCL) Connect the wires Pairing the dimmer and Pico remote control Location 2 Press and hold "Off" button on dimmer Location 1 UNTIL sec. Tagged Wire Status LEDs flash Ground Attach the wallplate bracket and Pico remote control HOLD...
Page 6 by Lutron 3-Way Installation - Caséta Wireless Dimmer with Pico Remote Control (PD-6WCL) Schematic Diagram Tagged Wire Location 1 Location 2 Load Traveler Caséta Pico Wireless Remote Line / Hot Traveler Dimmer * Control INC / Ground LFCA Neutral Tagged Wire Location 1 Location 2 Traveler...
Page 7 by Lutron 3-Way Installation - Caséta Wireless Switch with Pico Remote Control (PD-5WS-DV) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 8 by Lutron 3-Way Installation - Caséta Wireless Switch with Pico Remote Control (PD-5WS-DV) Ganging and derating Attach the wallplate Location 1 ‘snap’ PD-5WS-DV (120 V~) Halogen / incandescent 600 W 450 W 350 W Electronic Low-Voltage 600 W 450 W 350 W Magnetic Low-Voltage 600 VA / 475 W...
Page 9 by Lutron 3-Way Installation - Caséta Wireless Switch with Pico Remote Control (PD-5WS-DV) Connect the wires Pairing the switch and Pico remote control Location 2 Press and hold "Off" button on switch Location 1 UNTIL sec. Tagged Wire Status LED flashes Ground Attach the wallplate bracket and Pico remote control HOLD...
Page 10 by Lutron 3-Way Installation - Caséta Wireless Switch with Pico Remote Control (PD-5WS-DV) Schematic Diagram Tagged Wire Location 1 Location 2 Load Traveler Blue Caséta Pico Wireless Remote Line / Hot Traveler Black Switch * Control INC / Ground LFCA Neutral Tagged Wire Location 1...
Page 11 by Lutron 3-Way Installation - Caséta Wireless PRO Dimmer with Pico Remote Control (PD-10NXD) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 12 by Lutron 3-Way Installation - Caséta Wireless PRO Dimmer with Pico Remote Control (PD-10NXD) Remove side sections (if necessary) Mount the Caséta Wireless dimmer When installing more than one Caséta Wireless dimmer in the same Location 1 wallbox, it is necessary to remove inner side sections prior to wiring. See image and chart below for more information.
Page 13 by Lutron 3-Way Installation - Caséta Wireless PRO Dimmer with Pico Remote Control (PD-10NXD) Connect the wires Pairing the dimmer and Pico remote control Location 2 Press and hold "Off" button on dimmer Location 1 UNTIL sec. Tagged Wire Status LEDs flash Ground Attach the wallplate bracket and Pico remote control HOLD...
Page 14 by Lutron 3-Way Installation - Caséta Wireless PRO Dimmer with Pico Remote Control (PD-10NXD) Schematic Diagram Tagged Wire Location 1 Location 2 Load Traveler Blue Caséta Pico Wireless Remote Line / Hot Traveler Black Dimmer * Control INC / Ground White LFCA (optional) **...
Page 15 by Lutron 3-Way Installation - Caséta Wireless Neutral Switch with Pico Remote Control (PD-5ANS/PD-6ANS) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 16 by Lutron 3-Way Installation - Caséta Wireless Neutral Switch with Pico Remote Control (PD-5ANS/PD-6ANS) Remove side sections (if necessary) Mount the Caséta Wireless neutral switch When installing more than one Caséta Wireless switch in the same wallbox, Location 1 it is necessary to remove inner side sections prior to wiring. See image and chart below for more information.
Page 17 by Lutron 3-Way Installation - Caséta Wireless Neutral Switch with Pico Remote Control (PD-5ANS/PD-6ANS) Connect the wires Pairing the switch and Pico remote control Location 2 Press and hold "Off" button on switch Location 1 UNTIL sec. Tagged Wire Status LED flashes Ground Attach the wallplate bracket and Pico remote control HOLD...
Page 18 by Lutron 3-Way Installation - Caséta Wireless Neutral Switch with Pico Remote Control (PD-5ANS/PD-6ANS) Schematic Diagram Tagged Wire Location 1 Location 2 Load Traveler Blue Caséta Pico Wireless Remote Line / Hot Traveler Black Switch * Control INC / Ground White Neutral Tagged Wire...
Page 19 by Lutron 3-Way Installation - Caséta Wireless ELV+ Dimmer with Pico Remote Control (PD-5NE) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 20 by Lutron 3-Way Installation - Caséta Wireless ELV+ Dimmer with Pico Remote Control (PD-5NE) Remove side sections (if necessary) Mount the Caséta Wireless dimmer When installing more than one Caséta Wireless dimmer in the same Location 1 wallbox, it is necessary to remove inner side sections prior to wiring. See image and chart below for more information.
Page 21 by Lutron 3-Way Installation - Caséta Wireless ELV+ Dimmer with Pico Remote Control (PD-5NE) Connect the wires Pairing the dimmer and Pico remote control Location 2 Press and hold "Off" button on dimmer Location 1 UNTIL sec. Tagged Wire Status LEDs flash Ground Attach the wallplate bracket and Pico remote control HOLD...
Page 22 by Lutron 3-Way Installation - Caséta Wireless ELV+ Dimmer with Pico Remote Control (PD-5NE) Schematic Diagram Location 1 Location 2 Tagged Wire Line / Hot Traveler Black Traveler Caséta Wireless Pico Dimmer Remote White Control INC / Ground LFCA Neutral Tagged Wire Location 1 Location 2...
Page 23 by Lutron 3-Way Installation - Caséta Wireless Fan Control with Pico Remote Control (PD-FSQN) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 To Fan WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 24 by Lutron 3-Way Installation - Caséta Wireless Fan Control with Pico Remote Control (PD-FSQN) Remove side sections (if necessary) Attach the wallplate When installing more than one Caséta Wireless fan control in the same Location 1 wallbox, it is necessary to remove inner side sections prior to wiring. See ‘snap’...
Page 25 by Lutron 3-Way Installation - Caséta Wireless Fan Control with Pico Remote Control (PD-FSQN) Pairing the fan control and Pico remote Connect the wires control Location 2 Press and hold "Off" button on fan control Location 1 UNTIL sec. Tagged Wire Status LEDs flash Ground Attach the wallplate bracket and Pico remote control...
Page 26 by Lutron 3-Way Installation - Caséta Wireless Fan Control with Pico Remote Control (PD-FSQN) Schematic Diagram Tagged Wire Location 1 Location 2 Load Yellow Traveler Pico Remote FSQN* Line / Hot Traveler Black Control & Ground White Neutral Tagged Wire Location 1 Location 2 Traveler...
Page 27 by Lutron 3-Way Installation - Caséta Diva Smart Dimmer with Pico Remote Control (DVRF-6L) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 28 by Lutron 3-Way Installation - Caséta Diva Smart Dimmer with Pico Remote Control (DVRF-6L) Ganging and derating Mount the Caséta Diva Smart dimmer Location 1 Note: Diva Smart controls don’t have fins but derating is still required. See the chart below. Important note: Attach the wallplate Ganging units together may reduce the dimmer’s maximum wattage...
Page 29 by Lutron 3-Way Installation - Caséta Diva Smart Dimmer with Pico Remote Control (DVRF-6L) Connect the wires Pairing the dimmer and Pico remote control Location 2 Press and hold "Off" button on dimmer Location 1 UNTIL sec. Tagged Wire Status bar flashes Ground Attach the wallplate bracket and Pico remote control HOLD...
Page 30 by Lutron 3-Way Installation - Diva Smart Dimmer with Pico Remote Control (DVRF-6L) Schematic Diagram Tagged Wire Location 1 Location 2 Load Traveler Blue Caséta Pico Diva Remote Smart Line / Hot Traveler Black Control Dimmer * INC / Ground Neutral Tagged Wire Location 1...
Page 31 by Lutron 3-Way Installation - Caséta Diva Smart ELV+ Dimmer with Pico Remote Control (DVRF-5NE) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 32 by Lutron 3-Way Installation - Caséta Diva Smart ELV+ Dimmer with Pico Remote Control (DVRF-5NE) Ganging and derating Mount the Caséta Diva Smart dimmer Location 1 Note: Diva Smart controls don’t have fins but derating is still required. See the chart below. Important note: Attach the wallplate Ganging units together may reduce the dimmer’s maximum wattage...
Page 33 by Lutron 3-Way Installation - Caséta Diva Smart ELV+ Dimmer with Pico Remote Control (DVRF-5NE) Connect the wires Pairing the dimmer and Pico remote control Location 2 Press and hold "Off" button on dimmer Location 1 UNTIL sec. Tagged Wire Status bar flashes Ground Attach the wallplate bracket and Pico remote control...
Page 34 by Lutron 3-Way Installation - Caséta Wireless ELV+ Dimmer with Pico Remote Control (DVRF-5NE) Schematic Diagram Location 1 Location 2 Tagged Wire Line / Hot Traveler Black Diva Traveler Blue Smart Pico ELV+ Remote White Dimmer Control INC / Ground Neutral Tagged Wire Location 1...
Page 35 by Lutron 3-Way Installation - Caséta Claro Smart Switch with Pico Remote Control (DVRF-5NS) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 36 by Lutron 3-Way Installation - Caséta Claro Smart Switch with Pico Remote Control (DVRF-5NS) Ganging and derating Mount the Caséta Claro Smart switch Location 1 Note: Claro Smart controls don’t have fins but derating is still required. See the chart below. Important note: Attach the wallplate Ganging units together may reduce the switch’s maximum wattage...
Page 37 by Lutron 3-Way Installation - Caséta Claro Smart Switch with Pico Remote Control (DVRF-5NS) Connect the wires Pairing the switch and Pico remote control Location 2 Press and hold "Off" button on switch Location 1 UNTIL sec. Tagged Wire Status LED flashes Ground Attach the wallplate bracket and Pico remote control HOLD...
Page 38 by Lutron 3-Way Installation - Caséta Claro Smart Switch with Pico Remote Control (DVRF-5NS) Schematic Diagram Tagged Wire Location 1 Location 2 Load Traveler Blue Caséta Pico Claro Remote Smart Line / Hot Traveler Black Control Switch * INC / Ground White Neutral...
Page 39 by Lutron 3-Way Installation - Caséta Wireless Switch with Mechanical Toggle Switch (PD-5WS-DV) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 40 by Lutron 3-Way Installation - Caséta Wireless Switch with Mechanical Toggle Switch (PD-5WS-DV) Ganging and derating Attach the wallplate Location 1 ‘snap’ PD-5WS-DV (120 V~) Halogen/incandescent 600 W 450 W 350 W Electronic Low-Voltage 600 W 450 W 350 W Magnetic Low-Voltage 600 VA / 475 W 450 VA / 350 W...
Page 41 by Lutron 3-Way Installation - Caséta Wireless Switch with Mechanical Toggle Switch (PD-5WS-DV) Remount existing switch Turn power on at circuit breaker Location 2 Important note: Pico remote control (optional) If you would like to pair a Pico remote control to the Caséta Wireless switch, please follow the procedure described in the quick-start guide that came with your switch.
Page 42 by Lutron 3-Way Installation - Caséta Wireless PRO Dimmer with Mechanical Toggle Switch (PD-10NXD) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 43 by Lutron 3-Way Installation - Caséta Wireless PRO Dimmer with Mechanical Toggle Switch (PD-10NXD) Remove side sections (if necessary) Mount the Caséta Wireless dimmer When installing more than one Caséta Wireless dimmer in the same Location 1 wallbox, it is necessary to remove inner side sections prior to wiring. See image and chart below for more information.
Page 44 by Lutron 3-Way Installation - Caséta Wireless PRO Dimmer with Mechanical Toggle Switch (PD-10NXD) Modify wiring for existing toggle switch Turn power on at circuit breaker Location 2 Noted wire color from Step 8 Remaining wire Important note: Pico remote control (optional) Ground If you would like to pair a Pico remote control to the Caséta Wireless...
Page 45 by Lutron 3-Way Installation - Caséta Wireless PRO Dimmer with Mechanical Toggle Switch (PD-10NXD) Schematic Diagram Location 1 Location 2 Tagged Wire Traveler Line / Hot Caséta Toggle Load Black Wireless Switch Traveler Blue Dimmer* White ** INC / Ground (Green) LFCA Neutral...
Page 46 by Lutron 3-Way Installation - Caséta Wireless Neutral Switch with Mechanical Toggle Switch (PD-5ANS/PD-6ANS) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 47 by Lutron 3-Way Installation - Caséta Wireless Neutral Switch with Mechanical Toggle Switch (PD-5ANS/PD-6ANS) Remove side sections (if necessary) Mount the Caséta Wireless switch When installing more than one Caséta Wireless switch in the same wallbox, Location 1 it is necessary to remove inner side sections prior to wiring. See image and chart below for more information.
Page 48 by Lutron 3-Way Installation - Caséta Wireless Neutral Switch with Mechanical Toggle Switch (PD-5ANS/PD-6ANS) Modify wiring for existing toggle switch Turn power on at circuit breaker Location 2 Noted wire color from Step 8 Remaining wire Important note: Pico remote control (optional) Ground If you would like to pair a Pico remote control to the Caséta Wireless...
Page 49 by Lutron 3-Way Installation - Caséta Wireless Neutral Switch with Mechanical Toggle Switch (PD-5ANS/PD-6ANS) Schematic Diagram Location 1 Location 2 Tagged Wire Traveler Line / Hot Caséta Toggle Load Black Wireless Switch Traveler Blue Switch* White INC / Ground (Green) Neutral Location 1 Location 2...
Page 50 by Lutron 3-Way Installation - Caséta Diva Smart Dimmer with Mechanical Toggle Switch (DVRF-6L) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 51 by Lutron 3-Way Installation - Caséta Diva Smart Dimmer with Mechanical Toggle Switch (DVRF-6L) Ganging and derating Mount the Caséta Diva Smart dimmer Location 1 Note: Diva Smart controls don’t have fins but derating is still required. See the chart below. Important note: Attach the wallplate Ganging units together may reduce the dimmer’s maximum wattage...
Page 52 by Lutron 3-Way Installation - Caséta Diva Smart Dimmer with Mechanical Toggle Switch (DVRF-6L) Modify wiring for existing toggle switch Turn power on at circuit breaker Location 2 Noted wire color from Step 8 Remaining wire Important note: Pico remote control (optional) Ground If you would like to pair a Pico remote control to the Caséta Diva Smart...
Page 53 by Lutron 3-Way Installation - Caséta Diva Smart Dimmer with Mechanical Toggle Switch (DVRF-6L) Schematic Diagram Location 1 Location 2 Tagged Wire Traveler Caséta Line / Hot Diva Toggle Load Black Smart Switch Traveler Blue Dimmer* INC / Ground (Green) Neutral Location 1 Location 2...
Page 54 by Lutron 3-Way Installation - Caséta Diva Smart ELV+ Dimmer with Mechanical Toggle Switch (DVRF-5NE) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 55 by Lutron 3-Way Installation - Caséta Diva Smart ELV+ Dimmer with Mechanical Toggle Switch (DVRF-5NE) Ganging and derating Mount the Caséta Diva Smart dimmer Location 1 Note: Diva Smart controls don’t have fins but derating is still required. See the chart below. Important note: Attach the wallplate Ganging units together may reduce the dimmer’s maximum wattage...
Page 56 by Lutron 3-Way Installation - Caséta Diva Smart ELV+ Dimmer with Mechanical Toggle Switch (DVRF-5NE) Modify wiring for existing toggle switch Turn power on at circuit breaker Location 2 Noted wire color from Step 8 Remaining wire Important note: Pico remote control (optional) Ground If you would like to pair a Pico remote control to the Caséta Diva Smart...
Page 57 by Lutron 3-Way Installation - Caséta Diva Smart ELV+ Dimmer with Mechanical Toggle Switch (DVRF-5NE) Schematic Diagram Tagged Wire Traveler Tagged Wire Diva Smart Toggle Line / Hot Load Black Switch ELV+ Traveler Blue Dimmer* White INC / Ground (Green) Neutral Location 1 Location 2...
Page 58 by Lutron 3-Way Installation - Caséta Claro Smart Switch with Mechanical Toggle Switch (DVRF-5NS) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 59 by Lutron 3-Way Installation - Caséta Claro Smart Switch with Mechanical Toggle Switch (DVRF-5NS) Ganging and derating Mount the Caséta Claro Smart switch Location 1 Note: Claro Smart controls don’t have fins but derating is still required. See the chart below. Important note: Attach the wallplate Ganging units together may reduce the switch’s maximum wattage...
Page 60 by Lutron 3-Way Installation - Caséta Claro Smart Switch with Mechanical Toggle Switch (DVRF-5NS) Modify wiring for existing toggle switch Turn power on at circuit breaker Location 2 Noted wire color from Step 8 Remaining wire Important note: Pico remote control (optional) Ground If you would like to pair a Pico remote control to the Caséta Claro Smart...
Page 61 by Lutron 3-Way Installation - Caséta Claro Smart Switch with Mechanical Toggle Switch (DVRF-5NS) Schematic Diagram Location 1 Location 2 Tagged Wire Traveler Caséta Line / Hot Claro Toggle Load Black Smart Switch Traveler Blue Switch* White INC / Ground (Green) Neutral Location 1...
Page 62 by Lutron 3-Way Installation - Caséta Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L / DVRF-AS) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 63 by Lutron 3-Way Installation - Caséta Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L / DVRF-AS) Ganging and derating Mount the Caséta Diva Smart dimmer Location 1 Note: Diva Smart models don’t have fins but derating is still required. See the chart below. Important note: Attach the wallplate Ganging units together may reduce the dimmer’s maximum wattage...
Page 64 by Lutron 3-Way Installation - Caséta Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L / DVRF-AS) Connect the Claro Smart accessory switch Location 2 Black Blue Match noted wire color from Step 8 tied to blue wire. Tagged Wire Ground (Green Wire) Mount the Claro Smart accessory switch...
Page 65 by Lutron 3-Way Installation - Caséta Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L / DVRF-AS) Schematic Diagram Location 1 Location 2 Traveler Black Claro Diva Smart Smart Load Accessory Line / Hot Black Dimmer Switch Traveler Blue Blue Ground Ground INC /...
Page 66 by Lutron 3-Way Installation - Caséta Diva Smart ELV+ Dimmer with Claro Smart Accessory SW (DVRF-5NE/DVRF-AS) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 67 by Lutron 3-Way Installation - Caséta Diva Smart ELV+ Dimmer with Claro Smart Accessory SW (DVRF-5NE/DVRF-AS) Ganging and derating Mount the Caséta Diva Smart dimmer Location 1 Note: Diva Smart models don’t have fins but derating is still required. See the chart below. Important note: Attach the wallplate Ganging units together may reduce the dimmer’s maximum wattage...
Page 68 by Lutron 3-Way Installation - Caséta Diva Smart ELV+ Dimmer with Claro Smart Accessory SW (DVRF-5NE/DVRF-AS) Connect the Claro Smart accessory switch Location 2 Black Blue Match noted wire color from Step 8 tied to blue wire. Tagged Wire Ground (Green Wire) Mount the Claro Smart accessory switch Location 2...
Page 69 by Lutron 3-Way Installation - Caséta Diva Smart ELV+ Dimmer with Claro Smart Accessory SW (DVRF-5NE/DVRF-AS) Schematic Diagram Location 1 Location 2 Traveler Black Diva Claro Line / Hot Smart Smart Black Load Accessory ELV+ Switch Dimmer Traveler White Blue Blue INC / Ground...
Page 70 by Lutron 3-Way Installation - Caséta Claro Smart Switch with a Claro Smart Accessory Switch (DVRF-5NS / DVRF-AS) Identify existing wiring Turn power off at circuit breaker Location 1 Location 2 WARNING! Shock Hazard. May result in Serious Injury or Death. Turn off power at circuit breaker before installing the unit.
Page 71 by Lutron 3-Way Installation - Caséta Claro Smart Switch with a Claro Smart Accessory Switch (DVRF-5NS / DVRF-AS) Ganging and derating Mount the Caséta Claro Smart switch Location 1 Note: Claro Smart models don’t have fins but derating is still required. See the chart below. Important note: Attach the wallplate Ganging units together may reduce the switch’s maximum wattage...
Page 72 by Lutron 3-Way Installation - Caséta Claro Smart Switch with a Claro Smart Accessory Switch (DVRF-5NS / DVRF-AS) Connect the Claro Smart accessory switch Location 2 Black Blue Match noted wire color from Step 8 tied to blue wire. Tagged Wire Ground (Green Wire) Mount the Claro Smart accessory switch...
Page 73 by Lutron 3-Way Installation - Caséta Claro Smart Switch with a Claro Smart Accessory Switch (DVRF-5NS / DVRF-AS) Schematic Diagram Location 1 Location 2 Traveler Black Claro Claro Smart Load Smart Traveler Blue Blue Accessory Line / Hot Black Switch Switch Ground Ground...
Page 74 by Lutron Multi-Location Installation - Caséta Wireless Dimmer with Pico Remote Controls (PD-6WCL) Identify existing wiring Choose a location for your Caséta Wireless dimmer NOTE: There will be two different types of existing switches in this Location 1 Location 2 Location 3 application.
Page 75 by Lutron Multi-Location Installation - Caséta Wireless Dimmer with Pico Remote Controls (PD-6WCL) Tag and disconnect wires from the existing switch Connect the new Caséta Wireless dimmer Location 1 Location 1 Tagged wire Place tag - to identify wire on different color screw Ground Different...
Page 76 by Lutron Multi-Location Installation - Caséta Wireless Dimmer with Pico Remote Controls (PD-6WCL) Attach the wallplate bracket and Pico remote control Remove existing switch from wall at Location 2 Location 2 Location 2 Attach the wallplate Tag and disconnect wires from the existing switch Location 2 ‘snap’...
Page 77 by Lutron Multi-Location Installation - Caséta Wireless Dimmer with Pico Remote Controls (PD-6WCL) Tag and disconnect wires from the existing switch Turn power on at circuit breaker Location 3 Place tag - to identify wire on different color screw Pairing the dimmer and Pico remote controls Ground (Green / Bare Copper) Different Color Screw Press and hold "Off"...
Page 78 by Lutron Multi-Location Installation - Caséta Wireless Dimmer with Pico Remote Controls (PD-6WCL) Schematic Diagram Location 1 Location 2 Location 3 Traveler Traveler Caséta Pico Pico Wireless Remote Remote Load Line / Hot Traveler Traveler Dimmer * Control Control INC / Ground LFCA Neutral...
Page 79 by Lutron Multi-Location Installation - Caséta Wireless PRO Dimmer with Pico Remote Controls (PD-10NXD) Identify existing wiring Choose a location for your Caséta Wireless dimmer NOTE: There will be two different types of existing switches in this Location 1 Location 2 Location 3 application.
Page 80 by Lutron Multi-Location Installation - Caséta Wireless PRO Dimmer with Pico Remote Controls (PD-10NXD) Tag and disconnect wires from the existing switch Connect the new Caséta Wireless dimmer Location 1 Location 1 Tagged Wire Place tag - to identify wire on Blue different color screw If available,...
Page 81 by Lutron Multi-Location Installation - Caséta Wireless PRO Dimmer with Pico Remote Controls (PD-10NXD) Attach the wallplate bracket and Pico remote control Remove existing switch from wall at Location 2 Location 2 Location 2 Attach the wallplate Tag and disconnect wires from the existing switch Location 2 ‘snap’...
Page 82 by Lutron Multi-Location Installation - Caséta Wireless PRO Dimmer with Pico Remote Controls (PD-10NXD) Tag and disconnect wires from the existing switch Turn power on at circuit breaker Location 3 Place tag - to identify wire on different color screw Pairing the dimmer and Pico remote controls Ground (Green / Bare Copper) Different Color Screw...
Page 83 by Lutron Multi-Location Installation - Caséta Wireless PRO Dimmer with Pico Remote Controls (PD-10NXD) Schematic Diagram Location 1 Location 2 Location 3 Traveler Traveler Blue Caséta Pico Pico Wireless Remote Remote Load Line / Hot Traveler Traveler Dimmer * Control Control Black INC /...
Page 84 by Lutron Multi-Location Installation - Caséta Wireless Switch with Pico Remote Controls (PD-5WS-DV) Identify existing wiring Choose a location for your Caséta Wireless switch NOTE: There will be two different types of existing switches in this Location 1 Location 2 Location 3 application.
Page 85 by Lutron Multi-Location Installation - Caséta Wireless Switch with Pico Remote Controls (PD-5WS-DV) Tag and disconnect wires from the existing switch Mount the Caséta Wireless switch Location 1 Location 1 Place tag - to identify wire on different color screw Ground Different (Green / Bare Copper)
Page 86 by Lutron Multi-Location Installation - Caséta Wireless Switch with Pico Remote Controls (PD-5WS-DV) Attach the wallplate bracket and Pico remote control Remove existing switch from wall at Location 2 Location 2 Location 2 Attach the wallplate Tag and disconnect wires from the existing switch Location 2 ‘snap’...
Page 87 by Lutron Multi-Location Installation - Caséta Wireless Switch with Pico Remote Controls (PD-5WS-DV) Tag and disconnect wires from the existing switch Turn power on at circuit breaker Location 3 Place tag - to identify wire on different color screw Pairing the switch and Pico remote controls Ground (Green / Bare Copper) Different Color Screw Press and hold "Off"...
Page 88 by Lutron Multi-Location Installation - Caséta Wireless Switch with Pico Remote Controls (PD-5WS-DV) Schematic Diagram Location 1 Location 2 Location 3 Traveler Traveler Blue Caséta Pico Pico Wireless Remote Remote Load Line / Hot Traveler Traveler Black Switch * Control Control INC / Ground...
Page 89 by Lutron Multi-Location Installation - Caséta Wireless Neutral Switch with Pico Remote Controls (PD-5ANS/PD-6ANS) Identify existing wiring Choose a location for your Caséta Wireless switch NOTE: There will be two different types of existing switches in this Location 1 Location 2 Location 3 application.
Page 90 by Lutron Multi-Location Installation - Caséta Wireless Neutral Switch with Pico Remote Controls (PD-5ANS/PD-6ANS) Tag and disconnect wires from the existing switch Connect the new Caséta Wireless neutral switch Location 1 Location 1 Tagged wire Place tag - to identify wire on different color screw Black Blue...
Page 91 by Lutron Multi-Location Installation - Caséta Wireless Neutral Switch with Pico Remote Controls (PD-5ANS/PD-6ANS) Attach the wallplate bracket and Pico remote control Remove existing switch from wall at Location 2 Location 2 Location 2 Attach the wallplate Tag and disconnect wires from the existing switch Location 2 ‘snap’...
Page 92 by Lutron Multi-Location Installation - Caséta Wireless Neutral Switch with Pico Remote Controls (PD-5ANS/PD-6ANS) Tag and disconnect wires from the existing switch Turn power on at circuit breaker Location 3 Place tag - to identify wire on different color screw Pairing the switch and Pico remote controls Ground (Green / Bare Copper) Different Color Screw...
Page 93 by Lutron Multi-Location Installation - Caséta Wireless Neutral Switch with Pico Remote Controls (PD-5ANS/PD-6ANS) Schematic Diagram Location 1 Location 2 Location 3 Traveler Traveler Blue Caséta Pico Pico Wireless Remote Remote Load Line / Hot Traveler Traveler Black Switch * Control Control INC /...
Page 94 by Lutron Multi-Location Installation - Caséta Wireless ELV+ Dimmer with Pico Remote Controls (PD-5NE) Identify existing wiring Choose a location for your Caséta Wireless dimmer NOTE: There will be two different types of existing switches in this Location 1 Location 2 Location 3 application.
Page 95 by Lutron Multi-Location Installation - Caséta Wireless ELV+ Dimmer with Pico Remote Controls (PD-5NE) Tag and disconnect wires from the existing switch Connect the new Caséta Wireless dimmer Location 1 Location 1 Tagged wire Place tag - to identify wire on different color screw Black White...
Page 96 by Lutron Multi-Location Installation - Caséta Wireless ELV+ Dimmer with Pico Remote Controls (PD-5NE) Attach the wallplate bracket and Pico remote control Remove existing switch from wall at Location 2 Location 2 Location 2 Attach the wallplate Tag and disconnect wires from the existing switch Location 2 ‘snap’...
Page 97 by Lutron Multi-Location Installation - Caséta Wireless ELV+ Dimmer with Pico Remote Controls (PD-5NE) Tag and disconnect wires from the existing switch Turn power on at circuit breaker Location 3 Place tag - to identify wire on different color screw Pairing the dimmer and Pico remote controls Ground (Green / Bare Copper) Different Color Screw...
Page 98 by Lutron Multi-Location Installation - Caséta Wireless ELV+ Dimmer with Pico Remote Controls (PD-5NE) Schematic Diagram Location 1 Location 2 Location 3 Traveler Traveler Pico Caséta Pico Remote Wireless Remote Load Line / Hot Traveler Traveler Control Dimmer Control Black INC / Ground LFCA...
Page 99 by Lutron Multi-Location Installation - Caséta Wireless Fan Control with Pico Remote Controls (PD-FSQN) Identify existing wiring Choose a location for your Caséta Wireless fan control NOTE: There will be two different types of existing switches in this Location 1 Location 2 To Fan Location 3...
Page 100 by Lutron Multi-Location Installation - Caséta Wireless Fan Control with Pico Remote Controls (PD-FSQN) Tag and disconnect wires from the existing switch Connect the new Caséta Wireless fan control Location 1 Location 1 Tagged wire Place tag - to identify wire on different color screw Yellow Black...
Page 101 by Lutron Multi-Location Installation - Caséta Wireless Fan Control with Pico Remote Controls (PD-FSQN) Attach the wallplate bracket and Pico remote control Remove existing switch from wall at Location 2 Location 2 Location 2 Attach the wallplate Tag and disconnect wires from the existing switch Location 2 ‘snap’...
Page 102 by Lutron Multi-Location Installation - Caséta Wireless Fan Control with Pico Remote Controls (PD-FSQN) Tag and disconnect wires from the existing switch Turn power on at circuit breaker Location 3 Place tag - to identify wire on different color screw Pairing the fan control and Pico remote controls Ground (Green / Bare Copper)
Page 103 by Lutron Multi-Location Installation - Caséta Wireless Fan Control with Pico Remote Controls (PD-FSQN) Schematic Diagram Location 1 Location 2 Location 3 Traveler Traveler Yellow Pico Pico PD-FSQN Remote Remote Load Line / Hot Control Traveler Traveler Control Black & Ground White Neutral...
Page 104 by Lutron Multi-Location Installation - Caséta Diva Smart Dimmer with Pico Remote Controls (DVRF-6L) Identify existing wiring Choose a location for your Caséta Diva Smart dimmer NOTE: There will be two different types of existing switches in this Location 1 Location 2 Location 3 application.
Page 105 by Lutron Multi-Location Installation - Caséta Diva Smart Dimmer with Pico Remote Controls (DVRF-6L) Connect the new Caséta Diva Smart dimmer Tag and disconnect wires from the existing switch Location 1 Location 1 Tagged Wire Place tag - to identify wire on different color screw Black Blue...
Page 106 by Lutron Multi-Location Installation - Caséta Diva Smart Dimmer with Pico Remote Controls (DVRF-6L) Attach the wallplate bracket and Pico remote control Remove existing switch from wall at Location 2 Location 2 Location 2 Attach the wallplate Tag and disconnect wires from the existing switch Location 2 ‘snap’...
Page 107 by Lutron Multi-Location Installation - Caséta Diva Smart Dimmer with Pico Remote Controls (DVRF-6L) Tag and disconnect wires from the existing switch Turn power on at circuit breaker Location 3 Place tag - to identify wire on different color screw Pairing the dimmer and Pico remote controls Ground (Green / Bare Copper) Different Color Screw...
Page 108 by Lutron Multi-Location Installation - Caséta Diva Smart Dimmer with Pico Remote Controls (DVRF-6L) Multi-Location Installation - Caséta Diva Smart Dimmer with Pico Remote Controls (DVRF-6L) Schematic Diagram Location 1 Location 2 Location 3 Traveler Traveler Blue Caséta Pico Pico Diva Remote Remote...
Page 109 by Lutron Multi-Location Installation - Caséta Diva Smart ELV+ Dimmer with Pico Remote Controls (DVRF-5NE) Identify existing wiring Choose a location for your Caséta Diva Smart dimmer NOTE: There will be two different types of existing switches in this Location 1 Location 2 Location 3 application.
Page 110 by Lutron Multi-Location Installation - Caséta Diva Smart ELV+ Dimmer with Pico Remote Controls (DVRF-5NE) Connect the new Caséta Diva Smart dimmer Tag and disconnect wires from the existing switch Location 1 Location 1 Tagged Wire Place tag - to identify wire on different color screw Black Blue...
Page 111 by Lutron Multi-Location Installation - Caséta Diva Smart ELV+ Dimmer with Pico Remote Controls (DVRF-5NE) Attach the wallplate bracket and Pico remote control Remove existing switch from wall at Location 2 Location 2 Location 2 Attach the wallplate Tag and disconnect wires from the existing switch Location 2 ‘snap’...
Page 112 by Lutron Multi-Location Installation - Caséta Diva Smart ELV+ Dimmer with Pico Remote Controls (DVRF-5NE) Tag and disconnect wires from the existing switch Turn power on at circuit breaker Location 3 Place tag - to identify wire on different color screw Pairing the dimmer and Pico remote controls Ground (Green / Bare Copper) Different Color Screw...
Page 113 by Lutron Multi-Location Installation - Caséta Diva Smart ELV+ Dimmer with Pico Remote Controls (DVRF-5NE) Schematic Diagram Location 1 Location 2 Location 3 Traveler Traveler Blue Caséta Pico Pico Diva Remote Remote Smart Load Line / Hot Black Traveler Control Traveler Control ELV+...
Page 114 by Lutron Multi-Location Installation - Caséta Claro Smart Switch with Pico Remote Controls (DVRF-5NS) Identify existing wiring Choose a location for your Caséta Claro Smart switch NOTE: There will be two different types of existing switches in this Location 1 Location 2 Location 3 application.
Page 115 by Lutron Multi-Location Installation - Caséta Claro Smart Switch with Pico Remote Controls (DVRF-5NS) Tag and disconnect wires from the existing switch Connect the new Caséta Claro Smart switch Tagged Wire Location 1 Location 1 Place tag - to identify wire on different color screw Black Blue...
Page 116 by Lutron Multi-Location Installation - Caséta Claro Smart Switch with Pico Remote Controls (DVRF-5NS) Attach the wallplate bracket and Pico remote control Remove existing switch from wall at Location 2 Location 2 Location 2 Attach the wallplate Tag and disconnect wires from the existing switch Location 2 ‘snap’...
Page 117 by Lutron Multi-Location Installation - Caséta Claro Smart Switch with Pico Remote Controls (DVRF-5NS) Tag and disconnect wires from the existing switch Turn power on at circuit breaker Location 3 Place tag - to identify wire on different color screw Pairing the switch and Pico remote controls Ground (Green / Bare Copper) Different Color Screw...
Page 118 by Lutron Multi-Location Installation - Caséta Claro Smart Switch with Pico Remote Controls (DVRF-5NS) Schematic Diagram Location 1 Location 2 Location 3 Traveler Traveler Blue Caséta Pico Pico Claro Remote Remote Load Line / Hot Smart Traveler Traveler Black Control Control Switch * INC /...
Page 119 by Lutron Multi-Location Installation - Caséta Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L / DVRF-AS) Identify existing wiring Choose a location for your Caséta Diva Smart dimmer NOTE: There will be two different types of existing switches in this Location 1 Location 2 Location 3...
Page 120 by Lutron Multi-Location Installation - Caséta Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L / DVRF-AS) Tag and disconnect wires from the existing switch Connect the new Caséta Diva Smart dimmer Location 1 Location 1 Place tag - to identify wire on different color screw Black Tagged Wire...
Page 121 by Lutron Multi-Location Installation - Caséta Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L / DVRF-AS) Mount the Claro Smart accessory switch Remove existing switch from wall at Location 2 Location 2 Location 2 Attach the wallplate Tag and disconnect wires from the existing switch Location 2 Location 2 ‘snap’...
Page 122 by Lutron Multi-Location Installation - Caséta Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L /DVRF-AS) Tag and disconnect wires from the existing switch Attach the wallplate Location 3 Location 3 Place tag - to identify wire on different color screw ‘snap’...
Page 123 by Lutron Multi-Location Installation - Caséta Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L / DVRF-AS) Schematic Diagram Location 1 Location 2 Location 3 Line / Hot Black Traveler Black Black Traveler Caséta Claro Claro Diva Smart Smart Smart Accessory Accessory Blue...
Page 124 by Lutron Multi-Location Installation - Caséta Diva Smart ELV+ Dimmer with Claro Smart Accessory Switch (DVRF-5NE/DVRF-AS) Identify existing wiring Choose a location for your Caséta Diva Smart dimmer NOTE: There will be two different types of existing switches in this Location 1 Location 2 Location 3...
Page 125 by Lutron Multi-Location Installation - Caséta Diva Smart ELV+ Dimmer with Claro Smart Accessory Switch (DVRF-5NE/DVRF-AS) Tag and disconnect wires from the existing switch Connect the new Caséta Diva Smart dimmer Location 1 Location 1 Place tag - to identify wire on different color screw Black Tagged Wire...
Page 126 by Lutron Multi-Location Installation - Caséta Diva Smart ELV+ Dimmer with Claro Smart Accessory Switch (DVRF-5NE/DVRF-AS) Mount the Claro Smart accessory switch Remove existing switch from wall at Location 2 Location 2 Location 2 Attach the wallplate Tag and disconnect wires from the existing switch Location 2 Location 2 ‘snap’...
Page 127 by Lutron Multi-Location Installation - Caséta Diva Smart ELV+ Dimmer with Claro Smart Accessory Switch (DVRF-5NE/DVRF-AS) Tag and disconnect wires from the existing switch Attach the wallplate Location 3 Location 3 Place tag - to identify wire on different color screw ‘snap’...
Page 128 by Lutron Multi-Location Installation - Caséta Diva Smart ELV+ Dimmer with Claro Smart Accessory Switch (DVRF-5NE/DVRF-AS) Schematic Diagram Location 1 Location 2 Location 3 Line / Hot Caséta Black Caséta Traveler Black Black Caséta Traveler Claro Diva Claro Smart Smart Smart Accessory ELV+...
Page 129 by Lutron Multi-Location Installation - Caséta Claro Smart Switch with Claro Smart Accessory Switch (DVRF-5NS/DVRF-AS) Identify existing wiring Choose a location for your Caséta Claro Smart switch NOTE: There will be two different types of existing switches in this Location 1 Location 2 Location 3 application.
Page 130 by Lutron Multi-Location Installation - Caséta Claro Smart Switch with Claro Smart Accessory Switch (DVRF-5NS/DVRF-AS) Tag and disconnect wires from the existing switch Connect the new Caséta Claro Smart switch Location 1 Location 1 Place tag - to identify wire on different color screw Blue Note wire color...
Page 131 by Lutron Multi-Location Installation - Caséta Claro Smart Switch with Claro Smart Accessory Switch (DVRF-5NS/DVRF-AS) Mount the Claro Smart accessory awitch Remove existing switch from wall at Location 2 Location 2 Location 2 Attach the wallplate Tag and disconnect wires from the existing switch Location 2 Location 2 ‘snap’...
Page 132 by Lutron Multi-Location Installation - Caséta Claro Smart Switch with Claro Smart Accessory Switch (DVRF-5NS/DVRF-AS) Tag and disconnect wires from the existing switch Attach the wallplate Location 3 Location 3 Place tag - to identify wire on ‘snap’ different color screw Wallplate Ground (Green / Bare Copper) Different Color Screw...
Page 133 by Lutron Multi-Location Installation - Caséta Claro Smart Switch with Claro Smart Accessory Switch (DVRF-5NS/DVRF-AS) Schematic Diagram Location 1 Location 2 Location 3 Line / Hot Caséta Black Traveler Black Black Caséta Traveler Caséta Claro Claro Claro Smart Smart Smart Accessory Accessory Blue...
Page 134: Flashing Or Other Abnormal Light Behavior When Your Dimmer Is At A Low Light Level On A Dimmer (Pd-6Wcl)
by Lutron Adjusting Low-End Trim on a Caséta Wireless Dimmer (PD-6WCL) Adjust (continued) Brighter UNTIL Darker Light stops flickering and is stable Dimmer Save Adjusting Low-End Trim - To optimize performance of dimmable LED lamps UNTIL Enter Status LED stops flashing UNTIL HOLD sec.
Page 135 by Lutron Adjusting High-End Trim on a Caséta Wireless Dimmer (PD-6WCL) Adjust (continued) Brighter UNTIL Darker Desired light level is achieved Dimmer Save Adjusting High-End Trim - To optimize performance of dimmable LED lamps UNTIL Enter Status LED stops flashing UNTIL sec.
Page 136: On A Pro Dimmer (Pd-10Nxd)
by Lutron Adjusting Low-End Trim on a Caséta Wireless PRO Dimmer (PD-10NXD) Adjust (continued) Brighter UNTIL Darker Light stops flickering and is stable dimmer Save Adjusting Low-End Trim - To optimize performance of dimmable LED lamps UNTIL Enter Status LED stops flashing UNTIL HOLD sec.
Page 137: On A Pro Dimmer (Pd-10Nxd)
by Lutron Adjusting High-End Trim on a Caséta Wireless PRO Dimmer (PD-10NXD) Adjust (continued) Brighter UNTIL Darker Desired light level is achieved dimmer Save Adjusting High-End Trim - To optimize performance of dimmable LED lamps UNTIL Enter Status LED stops flashing UNTIL sec.
Page 138: On An Elv+ Dimmer (Pd-5Ne)
by Lutron Adjusting Low-End Trim on a Caséta Wireless ELV+ Dimmer (PD-5NE) Adjust (continued) Brighter Favorite UNTIL Darker Light stops flickering and is stable Dimmer Save Adjusting Low-End Trim - To optimize performance of dimmable LED lamps UNTIL Enter Status LED stops flashing UNTIL HOLD sec.
Page 139: On An Elv+ Dimmer (Pd-5Ne)
by Lutron Adjusting High-End Trim on a Caséta Wireless ELV+ Dimmer (PD-5NE) Adjust (continued) Brighter Favorite UNTIL Darker Desired light level is achieved Dimmer Save Adjusting High-End Trim - To optimize performance of dimmable LED lamps UNTIL Enter Status LED stops flashing UNTIL sec.
Page 140: On A Plug-In Lamp Dimmer (Pd-3Pcl)
by Lutron Adjusting Low-End Trim on a Caséta Wireless Plug-In Lamp Dimmer (PD-3PCL) Adjust (continued) Brighter Darker UNTIL Light stops flickering and is stable Plug-in lamp dimmer Adjusting Low-End Trim - Save To optimize performance of dimmable LED lamps Enter UNTIL UNTIL The status LED stops flashing...
Page 141: On A Plug-In Lamp Dimmer (Pd-3Pcl)
by Lutron Adjusting High-End Trim on a Caséta Wireless Plug-In Lamp Dimmer (PD-3PCL) Adjust (continued) Brighter Darker UNTIL Desired light level is achieved Plug-in lamp dimmer Adjusting High-End Trim - To optimize performance of dimmable LED lamps Save Enter UNTIL UNTIL sec.
Page 142: On A Diva Smart Dimmer (Dvrf-6L / Dvrf-5Ne)
by Lutron Adjusting Low-End Trim on a Caséta Diva Smart Dimmer (DVRF-6L / DVRF-5NE) Continue to hold the OFF button and push the FASS in to the closed position. Continue to hold the OFF button for approximately 6 seconds until the light bar starts flashing.
Page 143: Follow This Procedure If You Would Like Your Plug-In Lamp Dimmer To Act As A Switch For Non-Dimmable Lighting Loads
by Lutron Converting a Caséta Wireless Plug-In Lamp Dimmer to a Switch to Control Non-Dim Loads (PD-3PCL) Verify Tap "Off" one time. Light will turn off. Brighter Tap "On" one time. Light will turn on. Darker – The "Brighter" and "Darker"...
Page 144: Setting Dimmer Phase On A Caséta Wireless Elv+ Dimmer (Pd-5Ne)
by Lutron Setting Dimmer Phase on a Caséta Wireless ELV+ Dimmer (PD-5NE) Select Hold Brighter Forward-Phase Favorite (MLV) selected Darker TOP status LED starts flashing ELV+ dimmer Hold Adjusting for Load Types - Reverse-Phase (ELV) selected Configurable between ELV and MLV load types Pull out the FASS and then push back in BOTTOM status LED starts flashing...
Page 145: Setting Dimmer Phase On A Caséta Wireless Elv+ Dimmer (Dvrf-5Ne)
by Lutron Setting Dimmer Phase on a Caséta Diva Smart ELV+ Dimmer (DVRF-5NE) Important note: Continue to hold the ON button and push the FASS into the closed position. After holding the ON button The dimmer's current phase can be seen by following the steps below. for 6 seconds, the top and bottom LEDs will start The phase can ONLY be changed locally if the dimmer is NOT part of alternating for up to 3 seconds.
Page 146: Controls Or Reset Your Dimmer Or Switch To Its Factory Default Settings From A Dimmer (Pd-6Wcl/Pd-10Nxd/Pd-5Ne/Pd-3Pcl)
by Lutron Removing Paired Pico Remote Controls from a Caséta Wireless Dimmer (PD-6WCL / PD-10NXD / PD-5NE/PD-3PCL) Tap the "On" button quickly at least three times, Release the button, then immediately tap the button holding on the last press at least three more times and release and HOLD Continue to hold the "On"...
Page 147: From A Switch (Pd-5Ws-Dv/Pd-5Ans/Pd-6Ans)
by Lutron Removing Paired Pico Remote Controls from a Caséta Wireless Switch (PD-5WS-DV/PD-6ANS/PD-5ANS) Tap the "On" button quickly at least three times, Release the button, then immediately tap the button holding on the last press at least three more times and release Status LED flashes quickly Continue to hold the "On"...
Page 148: From A Fan Control (Pd-Fsqn)
by Lutron Removing Paired Pico Remote Controls from a Caséta Wireless Fan Control (PD-FSQN) Tap the "On" button quickly at least three times, Release the button, then immediately tap the button holding on the last press at least three more times and release Status LED flashes quickly All paired Pico remote controls are removed and all...
Page 149: Removing Paired Pico Remote Controls
by Lutron Removing Paired Pico Remote Controls from a Lutron Honeycomb Shade NOTE: This procedure will remove all paired Pico remote controls and favorite button programming. Upper and lower limits are retained. Tap the "Shade" button quickly at least three times, holding on the last press. Continue to hold the "Shade"...
Page 150 by Lutron Removing Paired Pico Remote Controls from a Lutron Roller Shade Roller Shades with a Single-Button (Battery-Powered and Plug-In) NOTE: This procedure will remove all paired Pico remote controls and favorite button programming. Upper and lower limits are retained. Tap the "Shade"...
Page 151: From A Diva Smart Dimmer (Dvrf-6L / Dvrf-5Ne)
by Lutron Removing Paired Pico Remote Controls from a Caséta Diva Smart Dimmer (DVRF-6L / DVRF-5NE) Tap the "On" button quickly at least three times, Release the button, then immediately tap the button holding on the last press at least three more times and release The light bar starts flashing and HOLD...
Page 152: From A Claro Smart Switch (Dvrf-5Ns)
by Lutron Removing Paired Pico Remote Controls from a Caséta Claro Smart Switch (DVRF-5NS) Tap the "On" button quickly at least three times, Release the button, then immediately tap the button holding on the last press at least three more times and release Status LED flashes quickly Continue to hold the "On"...
Page 153: Changing The Favorite Light Level On A Pico Remote Control
by Lutron Changing the Favorite Light Level on a Pico Remote Control Verify Tap "Off" button one time Favorite on remote control. Light will turn off. Tap "Favorite" button one time on remote control. Light will turn on to the newly saved level.
Page 154: Light Level Your Dimmer Recalls When You Press The "Favorite" Button On Your Phase Selectable Dimmer
by Lutron Changing the Favorite Light Level on a Caséta Wireless ELV+ Dimmer (PD-5NE) Verify Tap "Off" button one time on dimmer control. Light will Favorite turn off. Tap "Favorite" button one time on dimmer control. Light will turn on to the newly saved level.
Page 155: Change The Fan Speed Your Control Recalls When You Press The "Favorite" Button On Your Fan Control
by Lutron Changing the Favorite Fan Speed on a Caséta Wireless Fan Control (PD-FSQN) Verify Tap "Off" button one time on fan control. Fan will turn off. Favorite Tap "Favorite" button one time on fan control. Fan will turn on to the newly saved setting.
Page 156: The Lut-Mlc Is Provided To Help Ensure Proper Operation Of The Caséta Wireless Switch With Led, Fluorescent, And Elv Lighting Loads
by Lutron Installing a LUT-MLC Load Adapter with a Caséta Wireless Switch (PD-5WS-DV) Identify load type Turn power on at circuit breaker Fluorescent The LUT-MLC load adapter is provided to help ensure proper Verify performance operation of the switch with LED, fluorescent, and ELV lighting loads.
Page 157: Motion Sensor Placement And Coverage (Pd-Osens / Pd-Vsens)
by Lutron Motion Sensor Placement and Coverage (PD-OSENS / PD-VSENS) Temporary Mounting To test sensor coverage, a 3MT CommandT adhesive strip is provided for temporarily mounting the sensor. The strip is not reusable and should not be used for permanently mounting the sensor.
Page 158 by Lutron Motion Sensor Placement and Coverage (PD-OSENS / PD-VSENS) Motion Sensor Placement Examples Below and on the next few pages are examples of different spaces to place your motion sensor. Every home layout is different and these examples should only be used as a guideline. Powder Room A Caséta Wireless motion sensor is mounted in the corner at the height of 6 ft (1.8 m) where it can "see"...
Page 159 by Lutron Motion Sensor Placement and Coverage (PD-OSENS / PD-VSENS) Motion Sensor Placement Examples (continued) Kitchen A Caséta Wireless motion sensor is mounted flat on the wall at the height of 6 ft (1.8 m) where it can "see" the whole room *. The placement of the sensor ensures that it won’t see any movement outside of the kitchen, nor can the sensor see movement through the glass window.
Page 160 by Lutron Motion Sensor Placement and Coverage (PD-OSENS / PD-VSENS) Motion Sensor Placement Examples (continued) Bedroom A Caséta Wireless motion sensor is mounted flat on the wall near the Caséta Wireless dimmer at the height of 6 ft (1.8 m) where it can "see" the whole room.
Page 161 by Lutron Motion Sensor Placement and Coverage (PD-OSENS / PD-VSENS) Motion Sensor Placement Examples (continued) Garage A Caséta Wireless motion sensor is mounted in the corner at the height of 6 ft (1.8 m) and a second Caséta Wireless motion sensor is mounted offset to the wall.
Page 162 by Lutron Motion Sensor Placement and Coverage (PD-OSENS / PD-VSENS) Motion Sensor Placement Examples (continued) Hallway A Caséta Wireless motion sensor is mounted flat on the wall near the Caséta Wireless switch at the height of 6 ft (1.8 m) where it can "see" the whole hallway.
Page 163: Motion Sensor Advanced Features (Pd-Osens / Pd-Vsens)
by Lutron Motion Sensor Advanced Features (PD-OSENS / PD-VSENS) Off While Occupied When the load control is manually turned OFF, the sensor will not turn the lights back ON automatically while the room is occupied. Once the room is vacated, the Auto-On feature returns to normal operation after the timeout period has expired.
Page 164: Troubleshooting
by Lutron Dimmer and Switch Troubleshooting Symptoms Probable cause and action Light does not turn on or LEDs on the devices do not • Light bulb(s) burned out. illuminate. • Breaker is OFF or tripped. • Light not properly installed. •...
Page 165 • The Pico remote control battery is installed incorrectly. Go to www.casetawireless.com/support for additional troubleshooting suggestions. )Lutron, Lutron, Caséta, Claro, Diva, Pico, and FASS are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries.

This manual is also suitable for:

Caseta pd-10nxd Caseta pd-5ne Caseta pd-3pcl Caseta pd-5ws-dv Caseta pd-5ans Caseta pd-6ans ... Show all

Lutron Electronics Caseta DVRF-AS Advanced Installation Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lutron Electronics Caseta DVRF-AS

Summary of Contents for Lutron Electronics Caseta DVRF-AS

This manual is also suitable for:

Table of Contents