Angelo Decor Spilling Cask Manual

Spilling Cask Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Locate and retrieve the
light connection from
inside the fountain.
The light connection
should remain outside
the fountain.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Pass the tubing from the
top part into the body of
the fountain.
Align and lower the top
part on to the fountain.
Securely attach the cable
from the light connection
to the transformer.
Locate the tubing and
attach it to the pump.
Water flow can be
adjusted using the
control dial on the front of
the pump.
To prevent the risk of
water loss, create a drip
loop with the cables from
the lights.
Align the pump cord and
light cables with the
groove. Slide the pump
access door in place.
AD92046
Place the pump (with
tubing attached) inside
the fountain.
Printed in China