Angelo Decor Songbird Serenade Instructions

Songbird Serenade Fountain
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site www.angelodecor.com for assistance and warranty information.
Pass the power cord down the Pass the power cord down the
cord pipe. cord pipe.
Twist and lock the bowl to the Twist and lock the bowl to the
pedestal. pedestal.
Place the pump flat inside the reservoir. Lower the top over the pump
and twist and lock it to the bowl. Ensure the tubing is not kinked or
interfering with the assembly.
Locate and attach the decorative birds. The lighter
coloured bird on the left, darker coloured bird on the right.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
Product must be properly stored for winter.
Pull the excess cord through Pull the excess cord through
the bowl as shown above. the bowl as shown above.
Pump is preset to full strength. Pump is preset to full strength.
Adjust as needed. Adjust as needed.
The final assembly
should look like this
AD97017
Carefully rest the bowl on its side Carefully rest the bowl on its side
and pass the cord down the and pass the cord down the
pedestal. Align it with the groove at pedestal. Align it with the groove at
the base . the base .
Connect the pump to the tubing Connect the pump to the tubing
from the top piece. from the top piece.