Angelo Decor AD96031W Quick Start Manual

Frog Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange all parts.
First, pass the power cord through the cord
pipe then secure the cord pipe cover over the
cord pipe. This cover is pre-installed to the
power cord.
Attach the tubing from the pump
to the corresponding connection
from the top part of the fountain.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Locate the cable from the light
and attach it to the corresponding
connection from the pump.
With the light and tubing attached,
align and lower the top part of the
fountain on to the reservoir.
AD96031W
Attach the tubing to the fitting
from the pump. If needed, water
flow can be adjusted by the dial
on the front of the pump.
Printed in China