Angelo Decor Castillo Instructions

Castillo Fountain AD92019
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site www.angelodecor.com for assistance and warranty information.
Carefully unpack and arrange
Pass the tubing and cords Lower the top on to the fountain.
all parts.
from the light down and in to Locate and retrieve the tubing
the fountain body. and light cords.
Attach the tubing to the
Place the pump inside the Securely connect the light cords
pump.
fountain. to the bridge as shown above.
The light connection must sit Attach the cord from the bridge to the
outside the fountain. Do not transformer. Align the cords then slide
the pump access door in place.
submerge.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures. Printed in China