Angelo Decor AD98028 Quick Start Manual

Scala Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO
NOT return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and
warranty information.

Carefully unpack and arrange all parts.

Securely attach the light cord to the
transformer.

Fill with clean water and plug into a grounded GFCI outlet.

The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Locate the pre-installed tubing and
attach it to the output of the pump.
Water flow can be adjusted by using
the dial on the pump.
Insert the included black foam into the
reservoir; this will help to hide the
pump and cords and curb any
unnecessary splashing.
Place the pump inside the fountain,
then pass the power cord out the hole
at the back. Pass the light cord out the
hole at the rear as well.
AD98028
Printed in China