Fisher & Paykel CONTEMPORARY HC60DCEXB3 User Manual
Wall rangehood, box chimney with external blower
Hide thumbs
Also See for CONTEMPORARY HC60DCEXB3:
- Installation manual (24 pages) ,
- User manual (16 pages)
Related Manuals for Fisher & Paykel CONTEMPORARY HC60DCEXB3
Summary of Contents for Fisher & Paykel CONTEMPORARY HC60DCEXB3
- Page 1 WALL RANGEHOOD, BOX CHIMNEY WITH EXTERNAL BLOWER CONTEMPORARY HC60DCEXB3 & HC90DCEXB3 USER GUIDE / INSTALLATION GUIDE NZ AU...
- Page 3 WALL RANGEHOOD, BOX CHIMNEY WITH EXTERNAL BLOWER CONTEMPORARY HC60DCEXB3 & HC90DCEXB3 USER GUIDE NZ AU...
- Page 5 CONTENTS Safety and warnings Using your rangehood Control panel Care and cleaning Parts and accessories Troubleshooting Manufacturer’s Warranty Customer care Registration To register your product visit our website: fisherpaykel.com/register...
-
Page 6: Safety And Warnings
SAFETY AND WARNINGS WARNING! Electric Shock Hazard Failure to follow this advice may result in electric shock or death. • Always disconnect the appliance from the mains power supply before carrying out any maintenance or repairs. Failure to do so can result in death, electric shock, fire or injury to persons. - Page 7 SAFETY AND WARNINGS WARNING! When using this appliance always exercise basic safety precautions including the following: This product is for use with a compatible Fisher & Paykel external blower. Failure to comply could void your warranty. Please read the entire set of instructions before installing or using this appliance.
-
Page 8: Using Your Rangehood
USING YOUR RANGEHOOD This rangehood should be turned on for a few minutes before cooking in order to establish air currents upward through the rangehood. This will also enable hot air removal from your kitchen and keep the rangehood surface cool. When heat, smoke, moisture, grease and cooking odours are produced, they will be carried outside instead of drifting into other rooms. -
Page 9: Control Panel
CONTROL PANEL Illuminates to alert the need to clean filters. Can be deactivated 1 Filter cleaning alert with a single button press. Press to turn the timer on. The fan operates for 5 minutes at the 2 Timer current speed and each desceding speed before turning off. Press to turn the lights on/off. -
Page 10: Care And Cleaning
CARE AND CLEANING This rangehood should be cleaned regularly using a mild, liquid detergent and a clean soft cloth to avoid a build-up of grease occurring. Avoid the use of corrosive chemicals, abrasive cleaning products, hard brushes and steel wool pads. Grease deposits are corrosive which can cause damage. -
Page 11: Parts And Accessories
CARE AND CLEANING Replacing the light bulb ILCOS D code: DRR-3.5-220/240-GU10-50/50 Before changing the light bulb, ensure the rangehood is disconnected from the power supply. Remove the aluminium grease filters. Replace light bulbs. Refit the aluminium filters. Replacement bulbs are not covered by warranty. External blower maintenance and cleaning Before roof restoration or cleaning completely cover the outside motor system to avoid any chemical contact. -
Page 12: Troubleshooting
TROUBLESHOOTING If there is a problem with your rangehood, please check the following points before contacting your local Fisher & Paykel trained and supported service technician or the Customer Care Centre. PROBLEM POSSIBLE CAUSES WHAT TO DO The external blower The external blower is Turn off the rangehood. -
Page 13: Manufacturer's Warranty
MANUFACTURER’S WARRANTY You automatically receive a 2 year Manufacturer’s Warranty with the purchase of this Built-In Integrated Rangehood covering parts and labour for servicing within the country of purchase. Fisher & Paykel undertakes to: Repair or, at its option, replace without cost to the owner either for material or labour any part of the product, the serial number of which appears on the product, which is found to be defective within TWO YEARS of the date of purchase. - Page 14 MANUFACTURER’S WARRANTY For Australian Customers This Manufacturer’s Warranty is an extra benefit and does not affect your legal rights. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
-
Page 15: Customer Care
CUSTOMER CARE Before you call for service or assistance Check the things you can do yourself. Refer to your user guide and check that: 1 Your product is correctly installed. 2 You are familiar with its normal operation. If after checking these points you still need assistance or parts, please refer to your nearest Fisher &... - Page 16 CUSTOMER CARE *If you call, write or contact our website please provide: your name and address, model number, serial number, date of purchase and a complete description of the problem. This information is needed in order to better respond to your request for assistance.
- Page 19 WALL RANGEHOOD, BOX CHIMNEY WITH EXTERNAL BLOWER CONTEMPORARY HC60DCEXB3 & HC90DCEXB3 INSTALLATION GUIDE NZ AU...
-
Page 21: Table Of Contents
CONTENTS Safety and warnings Parts supplied Prior to installation Product dimensions Installation height Attachment dimensions Venting requirements Electricial requirements Attach brackets and mounting screws Prepare rangehood Hang rangehood Parts and accessories Final checklist... -
Page 22: Safety And Warnings
SAFETY AND WARNINGS WARNING! Electric Shock Hazard Failure to follow this advice may result in electric shock or death. • Always disconnect the appliance from the mains power supply before carrying out any maintenance or repairs. Failure to do so can result in death, electric shock, fire or injury to persons. - Page 23 SAFETY AND WARNINGS WARNING! When using this appliance always exercise basic safety precautions including the following: Please read the entire set of instructions before installing or using this appliance. Please make this information available to the person installing the appliance – doing so could reduce your installation costs.
-
Page 24: Parts Supplied
PARTS SUPPLIED WALL RANGEHOOD, BOX CHIMNEY WITH EXTERNAL BLOWER HC60DCEXB3 & HC90DCEXB3 models INSTALLATION GUIDE NZ AU Rangehood Installation guide 200 mm diameter ducting adapter (1) and screws (4) Upper chimney Chimney Upper chimney bracket (1) Chimney bracket 30 mm self Expansion plug tapping screw... -
Page 25: Prior To Installation
PRIOR TO INSTALLATION Fisher & Paykel is not liable for any damage caused by not following these instructions. Please read the instructions carefully. Unpack the rangehood. Ensure the voltage (V) and the frequency (Hz) indicated on the rating plate match the voltage and frequency of the installation site. -
Page 26: Product Dimensions
PRODUCT DIMENSIONS PLAN PROFILE FRONT BOTTOM VIEW... - Page 27 PRODUCT DIMENSIONS HC60 HC90 PRODUCT DIMENSIONS A Maximum overall height of product 1035 1035 B Minimum overall height of the product C Overall width of product D Overall depth of product E Height of hood F Height of stainless strip G Width of chimney H Depth of chimney I Distance from centre of ducting outlet...
-
Page 28: Installation Height
INSTALLATION HEIGHT HEIGHT DIMENSIONS A Ducted installation Minimum height Maximum height 1035 B Height top of cooktop to base of product Electric cooktop min 600 – max 750 Gas cooktop min 650 – max 750 This rangehood must be installed no lower than the minimum height indicated in the table above. - Page 29 INSTALLATION HEIGHT Induction cooktop considerations Induction cooktops use energy efficient technology that only heats the contents of a cooking pot. Unlike gas or traditional electric cooktops, the surrounding air does not get heated when using an induction cooktop. As a result, rangehood filters, splashbacks and surrounding cabinetry do not get warmed up, increasing the likelihood of condensation on these cooler surfaces.
-
Page 30: Attachment Dimensions
ATTACHMENT DIMENSIONS Ceiling Upper chimney extension bracket attachment points Chimney bracket attachment points Upper hood attachment points Lower hood attachment points HC60 HC90 ATTACHMENT DIMENSION A Lower rangehood attachment point width B Lower rangehood attachment point height C Upper rangehood attachment point width D Upper rangehood attachment point height E Chimney bracket attachment point width F Chimney bracket attachment point height... -
Page 31: Venting Requirements
VENTING REQUIREMENTS Attention should be given to ensure that any applicable regulations concerning the discharge of exhaust air are fulfilled. This rangehood is designed to operate with a Fisher & Paykel external blower with the exhaust air ducted externally from the kitchen. External blower rangehood installation is different from internal blower rangehood installation, please refer to the external blower installation guide for details. -
Page 32: Electricial Requirements
ELECTRICIAL REQUIREMENTS Rating plate location Before connecting the rangehood to the power supply, ensure the voltage and frequency indicated on the rating plate match that of the installation location: MODEL FREQUENCY VOLTAGE HC60 50 Hz 230 V HC90 50 Hz 230 V... -
Page 33: Attach Brackets And Mounting Screws
ATTACH BRACKETS AND MOUNTING SCREWS Attach the chimney bracket and upper chimney bracket (if using the upper chimney) in the locations shown. Use the 30mm screws and expansion plugs if attaching to masonry. Attach the upper hood mounting screws. Use the 30mm screws and expansion plugs if attaching to masonry. -
Page 34: Prepare Rangehood
PREPARE RANGEHOOD Warning: Failure to install the screws or fixing device in accordance with these instructions may result in an electrical hazards. Place the ducting adapter onto the hood and screw it in place using the 10mm screws supplied. Remove the filters – pull the catch and tilt the filter downwards until it disengages from the supports. -
Page 35: Hang Rangehood
HANG RANGEHOOD Hang the rangehood off the upper rangehood mounting screws. Hang off the keyhole attachment points on the back of the rangehood then tighten the screws. Attach the lower rangehood mounting screws to fix the rangehood to the wall. Refit the filters. duct straight up Attach flexible ducting to the ducting adapter using aluminium... - Page 36 ATTACH CHIMNEY Bend the tabs on the chimney. Place chimney around the rangehood chassis and hang off the chimney bracket. Extend the upper chimney and attach to the upper chimney bracket with 10mm screws.
-
Page 37: Complete Installation
COMPLETE INSTALLATION External blower Roof Ducting Install the external blower (if not already installed), refer to rangehood external blower installation guide. Connect to the external blower and Ceiling plug the rangehood in. Power cords Power cord path... -
Page 38: Parts And Accessories
PARTS AND ACCESSORIES ITEM REFERENCE NUMBER Flexible ducting 200mm (6m) 792961... -
Page 39: Final Checklist
FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER … Rangehood is correctly installed … All connections are secure … Connections have not pierced any electrical or water lines within the wall … Ducting has not been crushed or bent in any area’s …... - Page 40 FISHERPAYKEL.COM © Fisher & Paykel Appliances 2022. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue.
Need help?
Do you have a question about the CONTEMPORARY HC60DCEXB3 and is the answer not in the manual?
Questions and answers