Roche ACCU-CHEK Aviva Nano Quick Start Manual

Testing your blood glucose
When your meter is new
The date and time are
preset but to check this,
turn the meter on and
confirm the settings
using the on/off button.
Use the scrolling
buttons if the settings
need to change. Turn the meter off.
When you open a new pot of strips
Make sure the meter is
turned off. Insert the
code chip into the side
of the meter until it
clicks into place.
Make sure the code
number on the display
matches the code
number on the test
strip container.
*For more detailed instructions, please consult the user manual.
Everyday testing
Insert a test strip
1
into the meter in
the direction of
the arrow.
The meter will turn
on automatically.
A test strip and
flashing blood drop
symbol will then
appear on the display.
The meter is now ready.
Use the Multiclix
2
finger pricker to
get a blood
sample (see over).
Touch the blood
3
drop with the
front edge of the
yellow window of the
test strip. When there is
sufficient blood on the test strip
to get a reading an hourglass will
flash in the display.
The result will then
appear on the display.