Download
Share
Print this page
Pilz PSS u2 P0 F/S PN2 Operating Manual
  1. Manuals
  2. Brands
  3. Pilz Manuals
  4. I/O Systems
  5. PSS u2 P0 F/S PN2
  6. Operating manual
Pilz PSS u2 P0 F/S PN2 Operating Manual

Pilz PSS u2 P0 F/S PN2 Operating Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
PSS u2 P0 F/S PN2
}
Remote I/O system PSS u2
Operating Manual-1005394-EN-01

Advertisement

loading
Need help?

Need help?

Do you have a question about the PSS u2 P0 F/S PN2 and is the answer not in the manual?

Questions and answers

Related Manuals for Pilz PSS u2 P0 F/S PN2

Summary of Contents for Pilz PSS u2 P0 F/S PN2

  • Page 1 PSS u2 P0 F/S PN2 Remote I/O system PSS u2 Operating Manual-1005394-EN-01...
  • Page 2 Preface This document is the original document. All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made for the user's internal purposes. Suggestions and comments for improving this documenta- tion will be gratefully received.
  • Page 3 Deactivation and reactivation....................17 5.6.4 Projects ............................. 5.6.5 PROFIenergy ..........................5.6.6 Shared Device .......................... System reaction times ......................Substitute values ........................Installation ..........................General installation guidelines....................Dimensions in mm ........................Installing the head module......................Operating Manual PSS u2 P0 F/S PN2 1005394-EN-01...
  • Page 4 9.1.5 X3, X4 ............................9.1.6 RUN and DIAG ......................... 9.1.7 SO............................. Maintenance and repair ......................Technical Details ........................11.1 Safety characteristic data ......................Network data .......................... Order reference ........................13.1 Accessories ..........................Operating Manual PSS u2 P0 F/S PN2 1005394-EN-01...
  • Page 5 This operating manual explains the function and operation, describes the installation and provides guidelines on how to connect the product. This documentation is valid for the product PSS u2 P0 F/S PN2 hardware version 3.0 or higher. It is valid until new documentation is published.
  • Page 6 Introduction INFORMATION This gives advice on applications and provides information on special fea- tures. Operating Manual PSS u2 P0 F/S PN2 1005394-EN-01...
  • Page 7 Overview Overview Module features Application of the product PSS u2 P0 F/S PN2: Head module to connect the system to PROFINET with PROFIsafe profile. The head mod- ule can be connected to an IO controller as an IO device. The product has the following features:...
  • Page 8 Overview Front view [2] [3] Fig.: Front view PSS u2 P0 F/S PN2 Legend Order number Hardware version Devices MAC address LED to display the device status and PROFINET status Terminal block for connecting the supply voltages (supplied with the device)
  • Page 9 Safety Safety Intended use The module PSS u2 P0 F/S PN2 may only be used in the PSS u2 system. The module is designed for use in: Safety-related applications with – PROFINET with PROFIsafe profile Non-safety-related applications with – PROFINET The module meets the requirements of EN IEC 61508 up to SIL CL 3.
  • Page 10 In safety-related applications, please comply with the mission time T in the safety-related characteristic data. When decommissioning, please comply with local regulations regarding the disposal of electronic devices (e.g. Electrical and Electronic Equipment Act). Operating Manual PSS u2 P0 F/S PN2 | 10 1005394-EN-01...
  • Page 11 Perform a risk assessment in accordance with VDI/VDE 2182 or IEC 62443-3-2 and plan the security measures with care. If necessary, seek advice from Pilz Customer Support. Implemented security measures The password is saved in an encrypted format.
  • Page 12 Company firewall Machine firewall Internet Company network Machine network Product Configuration computer Fig.: Example network topology Note the network data [ for risk analysis and the security measures. Operating Manual PSS u2 P0 F/S PN2 | 12 1005394-EN-01...
  • Page 13 Data Periphery (FS/ST) Supply +24 V DC Fig.: Block diagram PSS u2 P0 F/S PN2 Supply voltage Module supply – Supplies voltage to the head module. – Supplies voltage to downstream modules (right-hand side) Periphery supply – Supplies voltage to the sensors, actuators and test pulses When the supply voltage is fed in separately, the module supply and periphery supply are galvanically isolated.
  • Page 14 Substitute values are used for the outputs until the connection to the controller has been re-established. Copying the device project from the removable data medium to the PSS u2 system Prerequisites A removable data medium must be plugged into the PSS u2 system. Operating Manual PSS u2 P0 F/S PN2 | 14 1005394-EN-01...
  • Page 15 PROFINET. The head module has an integrated switch with 2 phys- ical Ethernet ports. Both ports use the two MAC addresses that follow the device MAC ad- dress; i.e. a head module has 3 consecutive MAC addresses. Operating Manual PSS u2 P0 F/S PN2 | 15 1005394-EN-01...
  • Page 16 An F address is configured for each submodule. F-addresses can be set using PASconfig. The first F address for submodule 0 is also required for establishing the connection between the PASconfig PC and the PSS u2 system. Operating Manual PSS u2 P0 F/S PN2 | 16 1005394-EN-01...
  • Page 17 ST modules: Switching off the LEDs Switching off the terminals on ST output modules The head module does not support any energy saving functions for FS modules. Operating Manual PSS u2 P0 F/S PN2 | 17 1005394-EN-01...
  • Page 18 With the Shared Device function, the data of an IO-Device can be made available to sev- eral IO-Controllers. The head module PSS u2 P0 F/S PN2 as IO-Device can assign its data to a maximum of two IO-Controllers. Please note that all FS submodules may only be as- signed to one IO controller at a time.
  • Page 19 Damage due to electrostatic discharge! Electrostatic discharge can damage components. Ensure against discharge before touching the product, e.g. by touching an earthed, conductive sur- face or by wearing an earthed armband. Operating Manual PSS u2 P0 F/S PN2 | 19 1005394-EN-01...
  • Page 20 Installation Dimensions in mm 49,7 60,4 64,1 110,1 62,7 Fig.: Dimensions in mm Operating Manual PSS u2 P0 F/S PN2 | 20 1005394-EN-01...
  • Page 21 The mounting rail inter- lock must be in the open position, to the left. 2. Rotate the mounting rail interlock to the right to lock the head module on the mounting rail Operating Manual PSS u2 P0 F/S PN2 | 21 1005394-EN-01...
  • Page 22 (e.g. through shock, vibration). Such measures include, for example, fixed installation and strain relief (see graphic "Options for attaching the data cable to the head module"). Operating Manual PSS u2 P0 F/S PN2 | 22 1005394-EN-01...
  • Page 23 EF 8DO 0.5A EF 8DI Configuration in TIA Portal: Slot 0 Head module Subslot 2 Submodule 0 [PSS u2 EF 8DI] Subslot 3 Submodule 1 [PSS u2 EF 8DO 0.5A] Operating Manual PSS u2 P0 F/S PN2 | 23 1005394-EN-01...
  • Page 24 The length of the process data depends on the number and type of the configured modules. The description of the process image can be found in the manuals of the modules. Operating Manual PSS u2 P0 F/S PN2 | 24...
  • Page 25 Details of the minimum range for cable cross sections on connection terminals can be found under "Technical details [ 32]". Use copper wiring. The mounting rail must be earthed on both sides. Operating Manual PSS u2 P0 F/S PN2 | 25 1005394-EN-01...
  • Page 26 +24 V DC 0 V DC +24 V DC 0 V DC Earthing Infeed for Infeed for module supply periphery supply Fig.: Separate power supplies for module supply and periphery supply Operating Manual PSS u2 P0 F/S PN2 | 26 1005394-EN-01...
  • Page 27 Infeed for periphery supply Earthing Fig.: Common power supply for module supply and periphery supply Use the following fuses: Module supply: max. 6 A characteristic B/C Periphery supply: max. 8 A characteristic B/C Operating Manual PSS u2 P0 F/S PN2 | 27 1005394-EN-01...
  • Page 28 The head module contains a number of status LEDs, which provide information on the status of various system sections. MBUS DIAG Fig.: LEDs on the head module PSS u2 P0 F/S PN2 Legend LED on LED flashes LED flashes briefly LED off 9.1.1...
  • Page 29 LED. Various operating and fault states are displayed via the LEDs. X3, X4 Colour State Meaning No network connection Green Network connection present Green Data traffic is error-free Operating Manual PSS u2 P0 F/S PN2 | 29 1005394-EN-01...
  • Page 30 At least one submodule is not in operation and requires reintegration (e.g. after the exchange of an FS module). All other sub-modules that do not require reintegration are in operation. Operating Manual PSS u2 P0 F/S PN2 | 30 1005394-EN-01...
  • Page 31 No maintenance work is required on a PSS u2 system. Please return faulty PSS u2 sys- tems and/or modules to Pilz. INFORMATION When replacing modules and PSS u2 systems, observe the information on assembly/disassembly in the PSS u2 installation guidelines. Operating Manual PSS u2 P0 F/S PN2 | 31 1005394-EN-01...
  • Page 32 100 MBit/s Transmission rate selectable via Automatic Certification Manufacturer’s ID 092Fh Connection RJ45 Device type IO-Device Cycle time (RT) 1 ... 512 ms Cycle time (IRT) 1 ... 16 ms Operating Manual PSS u2 P0 F/S PN2 | 32 1005394-EN-01...
  • Page 33 Periphery supply and module supply Type of potential isolation Functional insulation Rated surge voltage 2500 V Potential isolation between Module Supply and PROFINET Type of potential isolation Functional insulation Rated surge voltage 1500 V Operating Manual PSS u2 P0 F/S PN2 | 33 1005394-EN-01...
  • Page 34 The safety-related characteristic data (PFH, PFD) are mean values. They have been calcu- lated at an average ambient component temperature of 40 °C and apply for the ambient temperature range stated in the technical details. Operating Manual PSS u2 P0 F/S PN2 | 34 1005394-EN-01...
  • Page 35 PROFINET SNMP server port PROFINET 34962 UDP unicast port PROFINET 34963 UDP multicast port PROFINET 34964 RCP Endpoint Mapper port PROFINET 49152 Service Request ports … 65535 Operating Manual PSS u2 P0 F/S PN2 | 35 1005394-EN-01...
  • Page 36 Labelling strips for electronic module 23.5 x 328913 (10 pcs.) 10.5 mm (10 x DIN A4 sheet) PSS u2 A LA E2 Labelling strips for electronic module 103 x 328914 (10 pcs.) 10.5 mm (10 x DIN A4 sheet) Operating Manual PSS u2 P0 F/S PN2 | 36 1005394-EN-01...
  • Page 37 We are represented internationally. Please refer to our homepage www.pilz.com for further details or contact our headquarters. Headquarters: Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: info@pilz.com, Internet: www.pilz.com...