Installing An Hp/Kensington Microsaver Security Cable Lock - HP ap5000 - All-in-One Point of Sale System Hardware Reference Manual

Installing an HP/Kensington MicroSaver Security Cable
Lock
1. Remove the bottom I/O cover (see
2. Install the cable lock into the lock slot on the bottom I/O panel.
Figure 2-12
3. Replace the bottom I/O cover (see
12 Chapter 2 Hardware Upgrades
Removing the Bottom I/O Cover on page

Installing an HP/Kensington MicroSaver Security Cable Lock

Replacing the Bottom I/O Cover on page
6).
6).
ENWW