Hardware Upgrades; Tools Needed; Warnings And Cautions - HP ap5000 - All-in-One Point of Sale System Hardware Reference Manual

2

Hardware Upgrades

Tools Needed

A Phillips head screwdriver is the only tool needed for most of the procedures described in this guide.

Warnings and Cautions

Before performing upgrades be sure to carefully read all of the applicable instructions, cautions, and
warnings in this guide.
WARNING!
Disconnect the power cord from the wall outlet and allow the internal system components to cool before
touching.
Do not plug telecommunications or telephone connectors into the network interface controller (NIC)
receptacles.
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation,
setup, posture, and health and work habits for computer users, and provides important electrical and
mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo.
CAUTION:
equipment. Before beginning these procedures, ensure that you are discharged of static electricity by
briefly touching a grounded metal object. See
When the system is plugged into an AC power source, voltage is always applied to the system board.
You must disconnect the power cord from the power source before opening the computer to prevent
damage to internal components.
ENWW
To reduce the risk of personal injury from electrical shock, hot surfaces, or fire:
Static electricity can damage the electrical components of the computer or optional
Electrostatic Discharge on page 29 for more information.
Tools Needed 5