Installing Cms - Netscape MANAGEMENT SYSTEM 6.1 - ADMINISTRATOR Administrator's Manual

Installing CMS

To install CMS:
Log in to the host system as the user ID you will be running the servers as. You
1.
must be logged into the host locally, do not install remotely.
See "Deciding the User and Group for Your Netscape Servers," on page 73 for
more information.
Go to the directory on the distribution CD or on your file system containing the
2.
CMS installation program (
they are tarred and or zipped.
Type the following command to start the installation program:
3.
./setup
The setup command has the following options:
-h
-s
-f <filename>
-b
-k
The installation program launches.
NOTE
The installation program will prompt you for series of configuration settings
detailed in the following steps.
Would you like to continue with installation? [Yes]: Press Enter.
4.
). Untar and/or unzip the distribution files if
setup
Prints out the help message.
Specifies the silent installation mode.
Specifies a silent installation script.
Only install binaries without configuration
Saves the installation cache. The cache will be saved to
the file <temp>/install.inf.
You can use the following commands during installation:
• Control-B will take you back one screen in the installation.
• Control-C will cancel the installation.
• Most prompts have a default value shown in square brackets. To
accept the default value, press Enter.
Installing CMS
Chapter 2 Installation 77