Netscape MANAGEMENT SYSTEM 6.1 - ADMINISTRATOR Administrator's Manual page 313

UGA1UEAxMOU3Vwcml5
YSBTaGV0dHkwgZ8wDQYJKoZIhdfNAQEBBQADgY0AMIGJAoGBAMr6eZiPGfjX3uRJ
gEjmKiqG7SdATYzBcA
Bu1AVyd7chRFOGD3wNktbf6hRo6EAmM5R1Askzf8AW7LiQZBcrXpc0k4du+2j6xJ
u2MPm8WKuMOTuvzpo+
SGXelmHVChEqooCwfdiZywyZNmgaMa2MS6pUkfQVAgMBAAGjNjA0MBEGCWCGSAGG
+EIBAQQEAwIAgD
-----END CERTIFICATE-----
• The certificate is at the CMS where your request was sent— if you have
previously sent the certificate request to a remote Certificate Manager
automatically and have noted the request ID that you received in return, you
can use it to retrieve the certificate from the Certificate Manager.
Step 4. View the Certificate or Certificate Chain
The wizard displays the certificate or certificate chain you have chosen to install.
Make sure you have chosen the right one; otherwise, use the Back button to go back
and locate the right one. Specify a nickname for the certificate.
Step 5. Install the Certificate or Certificate Chain
The wizard shows the certificate or certificate chain information you have selected
for installing. You should check the information to make sure that you have chosen
the correct one for installing.
After verifying that the certificate you have chosen is the correct one, click the
Install button. The wizard installs the certificate or the CA chain in the token you
have chosen.
• If you installed a certificate that has been issued by CA whose certificate chain
doesn't exist in the certificate database, you must add that CA's certificate
chain to the database. To add the CA chain to the database, copy the CA chain
to a text file, start the wizard again, and install the CA chain.
• If you installed (or imported) a certificate chain, the wizard adds (to the local
trust database) the first certificate in the chain as a trusted CA certificate and
any subsequent certificates as untrusted CA certificates. For more information
on how the wizard installs a certificate chain, see "Using the Wizard to Install a
Certificate or Certificate Chain" on page 309.
Step 6. Verify the Certificate Status
This step is applicable only if you installed a certificate chain.
Managing the Certificate Database
Chapter 7 Administrative Basics 313