Crls; Setting Up Notifications - Netscape MANAGEMENT SYSTEM 6.1 - ADMINISTRATOR Administrator's Manual

Table of Contents

Advertisement

Configuring a Registration Manager
Each certificate profile that will be used is configured by an administrator. The
administrator configures defaults and constraints, inputs, outputs, and specifies
the authentication method for each certificate profile.
The certificate profiles that have been configured are listed in the agent services
interface where the agent has to approve the certificate profile to enable it. Once the
certificate profile is enabled, it appears in the end entity interface.
When an end entity submits a request using a particular certificate profile, the
certificate profile is processed according to the authentication mechanism
associated with that certificate profile and thus the enrollment method, and the
certificate is issued following the constraints and extensions set in that certificate
profile. If the certificate profile is associated with the agent-approved
authentication method, the request is sent to the agent services interface for
processing. The agent can change some aspects of the request, as long as they are
within the constraints set in the certificate profile, reject the request, change the
status of the request, or approve the request.
For detailed information, see Chapter 10, "Certificate Profiles."
If you set up and enable a certificate profile in the Registration Manager, you
should set up a certificate profile with the same name in the Certificate Manager
that issues certificates for this Registration Manager. The certificate profile set up in
the Certificate Manager should have the value of field End User Certificate Profile
set to false so the request does not have to be processed through the input form
associated with the certificate profile in the Certificate Manager.

CRLs

A Registration Manager does not revoke certificates or create CRLs. The CA that
issues certificates for the RA is the only subsystem able to do these tasks.

Setting Up Notifications

The notification feature that allows you to send automated notifications is disabled
after installation. You need to enable and configure notifications in order to use this
feature. For detailed information on setting up notifications, see Chapter 12,
"Automated Notifications."
160
Netscape Certificate Management System Administrator's Guide • February 2003

Advertisement

Table of Contents
loading

This manual is also suitable for:

Certificate management system 6.1

Table of Contents