Netscape MANAGEMENT SYSTEM 6.1 - ADMINISTRATOR Administrator's Manual page 273

expirationTime. Specify, in seconds, the age limit for deleting the rotated log
files. The default value is 0 seconds, which indicates that the rotated log files
should not be deleted. If you provide a value, the rotated log will be deleted
from your system after that time has elapsed. This is no longer supported.
Logs will not be deleted, you cannot set a time for the automatic deletion of
logs.
fileName. Specify the full path, including the filename, to the file to write
messages. (Make sure that the server has read/write permission to the file.)
flushInterval. Specify the interval, in seconds, to flush the buffer to the file.
The default interval is 5 seconds. The
before the contents of the buffer are flushed out and added to the log file.
level. Specify a log level. The choices are
Warning, for Failure,
3
Security. The default selection is
(Message Categories)" on page 267.
maxFileSize. Specify the file size in kilobytes (KB) for the error log. The default
size is 100 KB. The
before it is rotated. Once it reaches this size, the file is copied to a rotated file,
and the log file is started anew. For more information, see "Log File Rotation"
on page 269.
register. If this variable is set to
messages will only be logged to the log file specified by
selftests.container.logger.fileName
the self tests messages will be written to BOTH the log file specified by
selftests.container.logger.fileName
log.instance.Transactions.fileName
rolloverInterval. Specify the frequency at which the server should rotate the
active error log file. The available choices are Hourly, Daily, Weekly, Monthly,
and Yearly. The default selection is Monthly. For more information, see "Log
File Rotation" on page 269.
type. Set to
transaction
Save the file.
5.
Start the CMS instance.
6.
flushInterval
for Misconfiguration,
4
. For more information, see "Log Levels
1
determines how large a log file can become
maxFileSize
(the default value), the self tests
false
or
system.
is the amount of time
for Debug, for Information,
0 1
for Catastrophe, and
5
. If this variable is set to
as well as to the log file specified by
.
Chapter 7 Administrative Basics
Logs
for
2
for
6
, then
true
273