Changing A Port Number - Netscape MANAGEMENT SYSTEM 6.1 - ADMINISTRATOR Administrator's Manual

Ports

Changing a Port Number

To change a port number:
Stop the CMS instance; see "Starting, Stopping, and Restarting CMS Instances"
1.
on page 254.
Go to the CMS configuration directory:
2.
<server_root>/cert-<instance_id>/config
Open the
3.
numbers:
288 Netscape Certificate Management System Administrator's Guide • February 2003
file in a text editor and edit the appropriate port
server.xml
To change the administration port, locate this line and edit the value of the
attribute:
port
<LS id="admin" ip="0.0.0.0" port="8200" security="on"
acceptorthreads="1" blocking="no">
To change the agent port, locate this line and edit the value of the
attribute:
<LS id="agent" ip="0.0.0.0" port="8100" security="on"
acceptorthreads="1" blocking="no">
To change the end-entity HTTP port, locate this line and edit the value of
the attribute:
port
<LS id="ee_nonSSL" ip="0.0.0.0" port="80" security="off"
acceptorthreads="1" blocking="no">
To change the end-entity HTTPS port, locate this line and edit the value
assigned to :
port
I.
Locate the following lines and delete them:
<LS id="ee_nonSSL" ip="0.0.0.0" port="80" security="off"
acceptorthreads="1" blocking="no">
<CONNECTIONGROUP id="ee_nonSSL_default"
matchingip="default" servername="<hostname.domainname>"
defaultvs="ee-vs"/>
Locate the following line:
II.
<VS id="ee-vs" state="on"
urlhosts="<hostname>.<domainname>" mime="mime1"
aclids="acl1" connections="eeSSL_default
ee_nonSSL_default">
and change it to:
port