Configuration Parameters Of Renewalnotificationjob - Netscape MANAGEMENT SYSTEM 6.1 - ADMINISTRATOR Administrator's Manual

Setting Up Specific Jobs
Edit all of the configuration parameters for the job module you are enabling
4.
and configuring.
To configure
jobsScheduler.job.certRenewalNotifier
of RenewalNotificationJob," on page 584 for details about these parameters.
To configure RequestInQueueJob, edit all parameters that begin with
jobsScheduler.job.requestInQueueNotifier
Parameters of RequestInQueueJob," on page 586 for details about these
parameters.
To configure UnpublishExpiredJob, edit all parameters that begin with
jobsScheduler.job.unpublishExpiredCerts
Parameters of UnpublishExpiredJob," on page 587 for details about these
parameters.
Save the file.
5.
Restart the server instance.
6.
If you set up a job that sends automated messages, check that your have
7.
correctly set up a mail server. See "Mail Server," on page 259.
If you set up a job that sends automated messages, you can customize those
8.
messages. See "Customizing Notification Messages," on page 589 for details.
Configuration Parameters of
RenewalNotificationJob
Table 13-2 gives details for each of these parameters that you configure either in the
CMS.cfg
Table 13-2 RenewalNotificationJob Parameters
Parameter
enabled
584 Netscape Certificate Management System Administrator's Guide • February 2003
RenewalNotifier
file or in the CMS console.
Description
Specifies whether the job is enabled or disabled. Specify the
value of this parameter as true to enable; specify the value
of this parameter as false to disable.
, edit all parameters that begin with
; see "Configuration Parameters
; see "Configuration
; see "Configuration