Acl Reference; Certserver.acl.configuration - Netscape MANAGEMENT SYSTEM 6.1 - ADMINISTRATOR Administrator's Manual

ACL Reference

c.
d.
Click Refresh when you are done.
7.
ACL Reference
This section lists all ACL resources defined for all subsystems, describes what each
resource controls, lists the possible operations describing the outcome of those
operations, and provides the default ACIs for each ACL resource defined. Each
subsystem you install will contain only those ACLs that are relevant to that
subsystem.

certServer.acl.configuration

Allow or deny a read or modify operation to the ACL configuration.
Operations
read
modify
Default ACIs
allow (read) group="Administrators" || group="Certificate Manager
Agents" || group="Registration Manager Agents" || group="Data
Recovery Manager Agents" || group="Online Certificate Status Manager
Agents" || group=Auditors
allow (modify) group="Administrators"
Agents, administrators, and auditors can read ACL configuration; only
administrators can modify ACL configuration.
352 Netscape Certificate Management System Administrator's Guide • February 2003
Specify the user, group, or IP address that will be granted or denied access
to the selected operators by providing the correct syntax in the Syntax
field. See "Syntax," on page 349 for details on syntax.
Click OK.
Viewing ACL resources and listing ACL resources, ACL listing
evaluators, and ACL evaluator types.
Adding, deleting, and updating ACL evaluators.