Configuration Parameters Of Requestinqueuejob - Netscape MANAGEMENT SYSTEM 6.1 - ADMINISTRATOR Administrator's Manual

Setting Up Specific Jobs
Table 13-2 RenewalNotificationJob Parameters (Continued)
Parameter
summary.
itemTemplate
summary.
emailTemplate
Configuration Parameters of
RequestInQueueJob
Table 13-3 gives details for each of these parameters that you configure either in the
CMS.cfg
Table 13-3 RequestInQueueJob Parameters
Parameter
enabled
cron
subsystemid
586 Netscape Certificate Management System Administrator's Guide • February 2003
Description
Specifies the path, including the filename, to the directory
that contains the template to be used to create the content
and format of each item to be collected for the summary
report (see the summary.emailTemplate parameter
below). For details, see "Customizing Notification
Messages" on page 589.
Specifies the path, including the filename, to the directory
that contains the template to be used for formulating the
summary report email notification. For details, see
"Customizing Notification Messages" on page 589.
file or in the CMS console.
Description
Specify the value of this parameter as true to enable;
specify the value of this parameter as false to disable.
Specifies the cron specification for when this job should be
run. This is the time at which the Job Scheduler daemon
thread checks the queue for pending requests.
Permissible values: Must follow the convention specified in
"Frequency Settings for Automated Jobs" on page 579.
Example: 00**0
Specifies the subsystem that this job is for.
Permissible values: ca or ra.
• ca specifies that the job is for the Certificate Manager.
• ra specifies that the job is for the Registration Manager.