Netscape MANAGEMENT SYSTEM 6.1 - ADMINISTRATOR Administrator's Manual page 542

Extension-Specific Policy Module Reference
Table 11-29 NameConstraintsExt Configuration Parameters (Continued)
Parameter
numPermittedSubtrees
numExcludedSubtrees
542 Netscape Certificate Management System Administrator's Guide • February 2003
Description
Specifies the total number of subtrees to be permitted in the extension.
Note that each permitted subtree has a set of configuration parameters and
you must specify appropriate values for each of these parameters;
otherwise the policy rule will return an error.
You can change the total number of permitted subtrees by changing the
value in this field; there's no restriction on the total number of permitted
subtrees you can include in the extension. Each set of configuration
parameters is distinguished by <n>, which is an integer derived from the
value you assign in this field. For example, if you set the
numPermittedSubtrees parameter to 2, <n> would be 0 and 1.
Permissible values: 0 or n.
• 0 specifies that no permitted subtrees can be contained in the extension.
• n specifies the total number of permitted subtrees to be included in the
extension; it must be an integer greater than zero. The default value is
8.
Specifies the total number of subtrees to be excluded in the extension. Note
that each excluded subtree has a set of configuration parameters and you
must specify appropriate values for each of these parameters; otherwise
the policy rule will return an error.
You can change the total number of excluded subtrees by changing the
value in this field; there's no restriction on the total number of excluded
subtrees you can include in the extension. Each set of configuration
parameters is distinguished by <n>, which is an integer derived from the
value you assign in this field. For example, if you set the
numExcludedSubtrees parameter to 2, <n> would be 0 and 1.
Permissible values: 0 or n.
• 0 specifies that no excluded subtrees can be contained in the extension.
• n specifies the total number of excluded subtrees to be included in the
extension; it must be an integer greater than zero. The default value is
8.