Table of Contents
Advertisement
Removing Servers from a Cluster
Removing Servers from a Cluster
To remove a server from the cluster, perform the following steps:
Go to the master Administration Server and choose the Cluster Mgmt tab.
1.
Click the Remove Server link.
2.
Select the remote server or servers to modify by:
3.
Click Reset Selection to undo all selections.
Click OK.
4.
A message appears confirming that the server is removed from the cluster. You can
no longer access the removed server through the cluster; you can only access it now
through it's own Administration Server.
Controlling Server Clusters
Enterprise Server 6.0 allows you to control the remote servers in your cluster by:
•
Starting and stopping them
•
Viewing their access and error logs
•
Transferring configuration files to them.
CAUTION
To control servers within your cluster, perform the following steps:
Go to the Server Manager for the master Administration Server, and choose the
1.
Cluster Mgmt tab.
Click the Cluster Control link.
2.
Select the server or servers to control by:
3.
142
Netscape Enterprise Server Administrator's Guide • November 2001
Checking a specific server
Clicking Select All
Clusters must be homogeneous. All servers in the cluster must be
either UNIX or Windows NT. Transferring configuration files from a
different platform may cause the server to hang or crash.
Checking a specific server
Advertisement
Table of Contents
