Table of Contents
Advertisement
Starting and Stopping the Server
The status of the server appears in the Server On/Off page. You can start and stop
the server using one of the following methods:
•
Click the Server On or Server Off in the Server On/Off page.
•
Use the Services window in the Control Panel (Windows NT).
•
Use
command
-i
•
Use
is restarted. If you set the
"
etc/inittab
automatically restarts. (UNIX/Linux)
After you shut down the server, it may take a few seconds for the server to
complete its shut-down process and for the status to change to "Off."
If your machine crashes or is taken offline, the server stops and any requests it was
servicing may be lost.
NOTE
NOTE
Setting the Termination Timeout
When the server is off, it stops accepting new connections. Then it waits for all
outstanding connections to complete. The time the server waits before timing out is
configurable in the
server_root
change the value, add the following line to
TerminateTimeout seconds
148
Netscape Enterprise Server Administrator's Guide • November 2001
If you want to use this script with
start.
http:2:respawn: server_root / type-identifier /start -start
in
. (UNIX/Linux)
/etc/inittab
, which shuts down the server completely, interrupting service until it
stop
"), you must remove the line pertaining to the web server in
respawn
before shutting down the server; otherwise, the server
If you have a security module installed with your server, you will be
required to enter the appropriate passwords before starting or stopping the
server.
On UNIX, some
more memory and/or file descriptors than your operating system allows
by default. If you are unable to start the server, check the resource limits
imposed by your operating system using the ulimit command. Your
operating system's ulimit man page should provide more information.
magnus.conf
server_name
/https-
file to automatically restart (using
etc/inittab
Enterprise Server
installations may require access to
file, which can be found in
. By default it is set to 30 seconds. To
/config/
magnus.conf
, you must include the start
init
:
Advertisement
Table of Contents
