Netscape ENTREPRISE SERVER 6.0 - ADMINISTRATOR Administrator's Manual page 424

Installing FrontPage Server Extensions
• Creates
and the document root directory.
Once you have completed the installation process, you must also perform the
following administrative tasks:
• For FrontPage 97 and 98, execute the
directory of your FrontPage directory) to set the server port, test the
extensions, install the extensions to other virtual servers, and update
extensions.
• For FrontPage 2000, run the Server Extensions Administrator (under Start |
Programs | Administrative Tools) or the command line version
(
• Select the server and web you want to work with:
• You need to provision each additional web. You can do this from the client
side, with the FrontPage client provided the client has the right authorization
(the administrator username and password) for the root web. You can also
provision user webs from the server side by using the program
to set the password for an individual web. You need to make sure that the new
FrontPage web does not inherit the administrator username and password
from the root web.
• Locate the
or
this to configure your FrontPage web.
• Users can edit the local web that is displayed when FrontPage is started, but
they must have a valid user ID and password to modify it.
424 Netscape Enterprise Server Administrator's Guide • November 2001
files in the
.nsconfig
).
fpsrvadm.exe
A remote machine must have the FrontPage97, FrontPage98, or FrontPage
2000 program installed (Macintosh or Windows only). Once the FrontPage
program is started, the user is prompted for the name of a server to edit or
open.
If the user wants to edit a web on a different machine, click on
"MoreWebs", on the line to select a web server or disk location enter the
servername:portnumber of the web to edit then click OK.
Select the web you wish to edit from the list of webs on the host machine.
fpadmin.htm
directory (2000) of your FrontPage program directory. You can use
\admcgi
,
\_vti_bin \_vti_adm
fpsrvwin.exe
file, typically in the
\admin\cgi
, directories
\_vti_aut
file (located in the
\bin
fpsrvadm.exe
directory (97 and 98)