Removing Servers From A Cluster; Controlling Server Clusters - Netscape ENTREPRISE SERVER 6.1 - 04-2002 ADMINISTRATOR Administrator's Manual

Removing Servers from a Cluster

Removing Servers from a Cluster
To remove a server from the cluster, perform the following steps:
Go to the master Administration Server and choose the Cluster Mgmt tab.
1.
Click the Remove Server link.
2.
Select the remote server or servers to modify by:
3.
Click Reset Selection to undo all selections.
Click OK.
4.
A message appears confirming that the server is removed from the cluster. You can
no longer access the removed server through the cluster; you can only access it now
through it's own Administration Server.

Controlling Server Clusters

Enterprise Server 6.1 allows you to control the remote servers in your cluster by:
• Starting and stopping them
• Viewing their access and error logs
• Transferring configuration files to them.
CAUTION
To control servers within your cluster, perform the following steps:
Go to the Server Manager for the master Administration Server, and choose the
1.
Cluster Mgmt tab.
Click the Cluster Control link.
2.
Select the server or servers to control by:
3.
144 Netscape Enterprise Server Administrator's Guide • April 2002 (Draft)
Checking a specific server
Clicking Select All
Clusters must be homogeneous. All servers in the cluster must be
either UNIX or Windows NT/Windows 2000. Transferring
configuration files from a different platform may cause the servers to
hang or crash.
Checking a specific server