Table of Contents
Advertisement
There are four possible values for the command_name parameter:
•
control
•
create
•
delete
•
list
Each command has its own set of command options. For more information, see the
sections in this chapter that describe each command.
Regardless of the value of the command parameter, the parameters shown in Table
A-1 can apply to all uses of the
Table A-1
HttpServerAdmin Parameters
Parameter
-d server_root
-sinst http_instance
control Command
Use the
command to start, stop, and disable classes and virtual servers. If
control
you do not specify a virtual server, the command starts, stops or disables every
virtual server in the class.
Options
Use the options shown in Table A-2 with the
and virtual servers.
Table A-2
Control command options
Options
-start
-stop
HttpServerAdmin
Value
(required). This parameter designates the path to the server
root (the location where the server is installed).
(required). This parameter designates which instance
HttpServerAdmin affects.
control
Value
Starts the specified virtual server, or all virtual servers in the
class if no virtual server is specified.
Stops the specified virtual server, or all virtual servers in the
class if no virtual server is specified.
HttpServerAdmin (Virtual Server Administration)
command.
command to control classes
Appendix A
Command Line Utilities
381
Advertisement
Table of Contents
