Table of Contents
Advertisement
Syntax
HttpServerAdmin create -l -ip ip_address -port port_number -sname
server_name -defaultvs default_virtual_server [-sec security] [-acct
number_of_accept_threads] -d server_root -sinst http_instance
Parameters
Use the parameters shown in Table A-7 with the
create listen sockets.
Table A-7
Create listen socket parameters
Parameter
-ip ip_address
-port port_number
-sname server_name
-defaultvs
default_virtual_server
-acct number_of_accept_threads
-sec on
Example
HttpServerAdmin create -l -id ls3 -ip 0.0.0.0 -port 1333 -sname
example -defaultvs vs2 -sec on -acct 4 -d /export/carey/server6
-sinst https-example.com
Create Virtual Server
Use this option of the create command to create a virtual server.
Please note that if you do not include values for some of the optional parameters,
defaults are provided. You can always change the default values after the virtual
server is created.
HttpServerAdmin (Virtual Server Administration)
create -l
Value
The IP address for the listen socket.
The port number for the listen socket.
The server name to associate with the listen socket.
The ID of the default virtual server. This virtual server
must exist before you can use it to create a listen socket.
(optional) The number of accept threads for the listen
socket.
(optional) If specified, use on to enable security for the
listen socket. If not specified, security is not enabled.
command option to
Appendix A
Command Line Utilities
385
Advertisement
Table of Contents
