Red Hat ENTERPRISE LINUX 4 System Administration Manual page 54

Chapter 2. Kickstart Configurator
3. Configure the partitions as previously described, except select Software RAID as the file system
type. Also, you must specify a hard drive on which to make the partition or specify an existing
partition to use.
Figure 2.6. Creating a Software RAID Partition
Repeat these steps to create as many partitions as needed for your RAID setup. All of your partitions
do not have to be RAID partitions.
After creating all the partitions needed to form a RAID device, follow these steps:
1. Click the RAID button.
2. Select Create a RAID device.
3. Select a mount point, file system type, RAID device name, RAID level, RAID members, number of
spares for the software RAID device, and whether to format the RAID device.
36