Red Hat ENTERPRISE LINUX 5 - ADMINISTRATION Manual page 92

Appendix B. Fence Device Parameters
Field
Login
Password
Password Script (optional) The script that supplies a password for access to the fence device.
Authentication Type
Use Lanplus
Table B.11. IPMI (Intelligent Platform Management Interface) LAN
Field Description
Name A name to assign the Manual fencing agent. Refer to the fence_manual(8) man
page for more information.
Table B.12. Manual Fencing
Warning
Manual fencing is not supported for production environments.
Field Description
Name A name for the McData device connected to the cluster.
IP Address The IP address assigned to the device.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Password The script that supplies a password for access to the fence device. Using this
supersedes the Password parameter.
Script
(optional)
Port The switch outlet number.
Table B.13. McData SAN Switch
Field Description
Name A name for the SANBox2 device connected to the cluster.
IP Address The IP address assigned to the device.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Password The script that supplies a password for access to the fence device. Using this
supersedes the Password parameter.
Script
(optional)
Port The switch outlet number.
Table B.14. QLogic SANBox2 Switch
Field Description
Name A name for the WTI RPS-10 power switch connected to the cluster.
82
Description
The login name of a user capable of issuing power on/off commands to
the given IPMI port.
The password used to authenticate the connection to the IPMI port.
Using this supersedes the Password parameter.
none, password, md2, or md5
True or 1. If blank, then value is False.