Red Hat ENTERPRISE LINUX 5 - ADMINISTRATION Manual page 90

Appendix B. Fence Device Parameters
Field Description
Password The script that supplies a password for access to the fence device. Using this
supersedes the Password parameter.
Script
(optional)
Domain Domain of the Bull PAP system to power cycle.
Table B.3. Bull PAP (Platform Administration Processor)
Field Description
Name The name assigned to the DRAC.
IP Address The IP address assigned to the DRAC.
Login The login name used to access the DRAC.
Password The password used to authenticate the connection to the DRAC.
Module name (optional) The module name for the DRAC when you have multiple DRAC modules.
Password The script that supplies a password for access to the fence device. Using this
supersedes the Password parameter.
Script
(optional)
Use SSH (Rhel 5.4 and later) Indicates that system will use SSH to access the device.
(DRAC5 only)
Table B.4. Dell DRAC
Field Description
Name A name for the BladeFrame device connected to the cluster.
CServer The hostname (and optionally the username in the form of username@hostname)
assigned to the device. Refer to the fence_egenera(8) man page for more
information.
ESH Path The path to the esh command on the cserver (default is /opt/pan- mgr/bin/esh)
(optional)
lpan The logical process area network (LPAN) of the device.
pserver The processing blade (pserver) name of the device.
Table B.5. Egenera SAN Controller
Field Description
Name A name for the RSB to use as a fence device.
Hostname The hostname assigned to the device.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Password The script that supplies a password for access to the fence device. Using this
supersedes the Password parameter.
Script
(optional)
Table B.6. Fujitsu Siemens Remoteview Service Board (RSB)
Field Description
Name A name for the GNBD device used to fence the cluster. Note that the GFS server
must be accessed via GNBD for cluster node fencing support.
80