Red Hat ENTERPRISE LINUX 5 - ADMINISTRATION Manual page 34

Chapter 3. Configuring Red Hat Cluster With Conga
# yum install ricci
2. At each node to be administered by Conga, start ricci. For example:
# service ricci start
Starting ricci:
3. Select a computer to host luci and install the luci software on that computer. For example:
# yum install luci
Note
Typically, a computer in a server cage or a data center hosts luci; however, a cluster
computer can host luci.
4. At the computer running luci, initialize the luci server using the luci_admin init command.
For example:
# luci_admin init
Initializing the Luci server
Creating the 'admin' user
Enter password:
Confirm password: <Re-type password and press ENTER.>
Please wait...
The admin password has been successfully set.
Generating SSL certificates...
Luci server has been successfully initialized
Restart the Luci server for changes to take effect
eg. service luci restart
5. Start luci using service luci restart. For example:
# service luci restart
Shutting down luci:
Starting luci: generating https SSL certificates...
24
<Type password and press ENTER.>
[ OK ]
[ OK ]
done