Creating A Shared Fence Device - Red Hat ENTERPRISE LINUX 5 - ADMINISTRATION Manual

Chapter 3. Configuring Red Hat Cluster With Conga
The starting point of each procedure is at the cluster-specific page that you navigate to from Choose a
cluster to administer displayed on the cluster tab.

3.5.1. Creating a Shared Fence Device

To create a shared fence device, follow these steps:
1. At the detailed menu for the cluster (below the clusters menu), click Shared Fence Devices.
Clicking Shared Fence Devices causes the display of the fence devices for a cluster and causes
the display of menu items for fence device configuration: Add a Fence Device and Configure a
Fence Device.
Note
If this is an initial cluster configuration, no fence devices have been created, and
therefore none are displayed.
2. Click Add a Fence Device. Clicking Add a Fence Device causes the Add a Sharable Fence
Device page to be displayed (refer to
30
Figure 3.1, "Fence Device Configuration").