Creating A Shared Fence Device - Red Hat ENTERPRISE LINUX 4 - ADMINISTRATION Manual

• Bull PAP
• Egenera SAN Controller
• GNBD
• IBM Blade Center
• McData SAN Switch
• QLogic SANbox2
• SCSI Fencing
• Virtual Machine Fencing
• Vixel SAN Switch
• WTI Power Switch
The following non-shared fence devices are available:
• Dell DRAC
• HP iLO
• IBM RSA II
• IPMI LAN
• RPS10 Serial Switch
This section provides procedures for the following tasks:
• Creating shared fence devices — Refer to
procedures apply only to creating shared fence devices. You can create non-shared (and shared)
fence devices while configuring nodes (refer to
• Modifying or deleting fence devices — Refer to
Device". The procedures apply to both shared and non-shared fence devices.
The starting point of each procedure is at the cluster-specific page that you navigate to from Choose a
cluster to administer displayed on the cluster tab.

3.5.1. Creating a Shared Fence Device

To create a shared fence device, follow these steps:
1. At the detailed menu for the cluster (below the clusters menu), click Shared Fence Devices.
Clicking Shared Fence Devices causes the display of the fence devices for a cluster and causes
the display of menu items for fence device configuration: Add a Fence Device and Configure a
Fence Device.
Section 3.5.1, "Creating a Shared Fence
Section 3.6, "Configuring Cluster
Section 3.5.2, "Modifying or Deleting a Fence
Creating a Shared Fence Device
Device". The
Members").
29