Installation And Configuration Process; Installation Overview - Red Hat CERTIFICATE SYSTEM 7.1 - ADMINISTRATOR Administrator's Manual

Installation Overview

Installation and Configuration Process

The following outlines the process for installing, setting up, and configuring CS:
Run the installation program to install Administration Server, Directory Server, and CS
1.
on each host system that will be part of your deployment. See "Installing CS" on
page 72 for complete instructions on installing CS.
Configure each subsystem that will be running on each host. CS provides an
2.
installation wizard for configuring an instance of each of the subsystems. Complete
instructions for configuring each of the subsystems can be found at the following
locations:
❍
❍
❍
❍
❍
Get the first agent certificate for the subsystem. See "Agent Certificates," on page 324"
3.
for complete instructions.
Configure the instance for the particular needs of your PKI. For complete details on
4.
configuring each of the subsystems, see the chapter that describes that subsystem:
❍
❍
❍
❍
Installation Overview
This section provides information about the CS installation, and provides information about
things you need to consider and decide when installing CS.
66 Red Hat Certificate System Administrator's Guide • September 2005
"Installing a Certificate Manager as a Root CA," on page 85
"Installing a Certificate Manager as a Subordinate CA," on page 90
"Installing a Registration Manager," on page 133
"Installing an Online Certificate Status Manager," on page 165
"Installing a Standalone Data Recovery Manager," on page 203
Chapter 3, "Certificate Manager"
Chapter 4, "Registration Manager"
Chapter 5, "OCSP Responder"
Chapter 6, "Data Recovery Manager"