Red Hat CERTIFICATE SYSTEM 7.1 - ADMINISTRATOR Administrator's Manual page 422

Setting Up Certificate Profiles
The inputs tab lists inputs that have been set up for this certificate profile. You can add
an input or you can delete an input. You can select an input and then select edit; but
since the input has no parameters or other settings, there is nothing to configure.
To add an input:
a.
b.
c.
d.
To delete an input:
a.
b.
Set up outputs in the Outputs tab of the Certificate Profile Rule Editor window.
10.
You need to set up outputs for any certificate profile that uses an automated
authentication method, you do not need to set up outputs for any certificate profile that
uses an agent-approved authentication method. The outputs tab lists inputs that have
been set up for this certificate profile. You can add an output or you can delete an
output. You can select an output and then select edit; but since the output has no
parameters or other settings, there is nothing to configure.
To add an output:
a.
b.
c.
422 Red Hat Certificate System Administrator's Guide • September 2005
Click Add.
The Certificate Profile Input Editor window appears.
Choose the input you want to add from the list and then click OK. See "Input
Reference," on page 426 for complete details of the default inputs.
The New Certificate Profile Editor window appears.
Fill in the following fields:
Id. Type a name or identifier for this input.
Click Ok.
This input will be listed in the input tab. You can edit it to provide values to the
parameters in this input.
Select the input.
Click delete.
Click Add.
The Certificate Profile Output Editor window appears.
Choose the output you want to add from the list and then click OK.
The New Certificate Profile Editor window appears.
Fill in the following fields:
Id. Type a name or identifier for this output.