Red Hat CERTIFICATE SYSTEM 7.1 - ADMINISTRATOR Administrator's Manual page 624

Rules
Enter the appropriate information:
6.
Rule ID. Type a name for the rule that will help you identify it later; use an
alphanumeric string with no spaces. For example,
type. Select the type value from the list. The type value depends on which type of
certificate this rule applies. For a Certificate Manager signing certificate, the value is
cacert
certificates, the value is
predicate. Type the predicate value for the type of certificate, or CRL issuing point this
rule applies. The predicate value for each type of certificate is listed in Table 16-11 on
page 625
Table 16-12 on page 625
enable. Select to enable this rule.
mapper. Mappers are not necessary when publishing to a file, they are only needed for
LDAP publishing. If this rule will be associated with a publisher that publishes to an
LDAP directory, select an appropriate mapper here. Leave blank for all other forms of
publishing.
publisher. Select a publisher you created that will be associated with this rule. For
example, if this rule publishes user certificates to a file, chose the publisher that
publishes to a file in the location set up for user certificates.
624 Red Hat Certificate System Administrator's Guide • September 2005
. For a cross-signed certificate, the value is
. For CRLs, specify
certs
The predicate value for CRL issuing points and delta CRLs is listed in
.
.
PublishCaCertToFile
. For all other types of
xcert
.
crl
.