Table of Contents
Advertisement
Installation
This chapter describes the initial installation of the RHN Satellite Server. It presumes the
prerequisites listed in Chapter 2 Requirements have been met. If you are instead upgrad-
ing to a newer version of RHN Satellite Server, contact your Red Hat representative for
assistance.
4.1. Base Install
The RHN Satellite Server is designed to run on the Red Hat Enterprise Linux AS operating
system. Therefore, the first phase is to install the base operating system, either from disc,
ISO image, or kickstart. During and after operating system installation, make sure you:
•
Allocate plenty of space to the partitions storing data. The default location for channel
packages is
/var/satellite/
remember the database RPMs go in the
. Refer to Section 2.2 Hardware Requirements for precise specifications.
in
/rhnsat/
Install
all
•
Section 2.1 Software Requirements for packages and package groups needed for each
version of Red Hat Enterprise Linux AS.
Enable Network Time Protocol (NTP) on the Satellite and separate database, if it exists,
•
and select the appropriate time zone. All client systems should already be running the
daemon and be set to the correct time zone.
ntpd
Due to potential complications, it is strongly advised that the
•
mounted.
4.2. RHN Satellite Server Installation Program
The following instructions describe how to run the RHN Satellite Server Installation
Program:
1. Log into the machine as root.
2. Insert the RHN Satellite Server CD containing the installation files or download the
ISO image from the RHN website.
3. Create a directory in
. For RHN Satellite Server with Embedded Database,
packages
required
to store the files with the command:
/mnt/
Chapter 4.
partition, while the database itself is built
/opt/
by
RHN
Satellite
Server.
Refer
partition is locally
/home/
to
Advertisement
Table of Contents
