Certificate Profile Reference - Red Hat CERTIFICATE SYSTEM 7.1 - ADMINISTRATOR Administrator's Manual

d.
To delete an output:
a.
b.
Delete any certificate profiles you don't want approved by an agent. Any certificate
11.
profile that appears in the Certificate Profile Instance Management tab also appears on
the Certificate Profiles page in the agent services interface. The certificate profile can
be enabled by an agent. If you do not want a certificate profile enabled by an agent,
delete that certificate profile from this list by selecting it and then clicking delete.
NOTE

Certificate Profile Reference

A set of certificate profiles have been prebuilt for the types of certificates that are usually
issued by a RA and a CA. All certificate profiles are installed with a CA, only those
certificate profiles beginning with
profiles include the following:
• caUserCert
Configured for end user enrollments in a Certificate Manager.
• caDualCert
Configured for enrollments for dual key pairs in a Certificate Manager. Two keys will
be generated, a signing key and an encryption key, and two certificates will be issued,
one for each of those keys. This certificate profile will only work with the Netscape 7
or later browser.
• caServerCert
Configured for enrollments for an SSL server certificate in a Certificate Manager.
• caCACert
Click Ok.
This output will be listed in the output tab. You can edit it to provide values to the
parameters in this output.
Select the output.
Click delete.
Once a certificate profile is enabled by an agent, that certificate profile is
marked enabled in the Certificate Profile Instance Management tab, and
the certificate profile cannot be edited in any way. To edit that certificate
profile, an agent must first disable the certificate profile.
are installed with and RA. The default certificate
ra
Certificate Profile Reference
Chapter 11 Certificate Profiles 423