Enabling Publishing - Red Hat CERTIFICATE SYSTEM 7.1 - ADMINISTRATOR Administrator's Manual

Enabling Publishing

LdapCRLRule
The
LdapCRLRule
Table 16-16 LdapCRL Rule Configuration Parameters
Parameter
type
predicate
enable
mapper
publisher
Enabling Publishing
You can enable just file publishing, or both LDAP and file publishing. You should enable
publishing after setting up publishers, rules, and mappers. Once enabled, the server will
attempt to publish. If you have not set up publishing correctly before enabling publishing,
your results may be undesirable, or the publishing feature may fail completely.
To enable publishing:
In the navigation tree of the CS window, select Certificate Manager, and then select
1.
Publishing.
The right pane shows the publishing details necessary for the server to publish to an
LDAP-compliant directory.
To enable publishing to a file only, select Enable Publishing.
2.
628 Red Hat Certificate System Administrator's Guide • September 2005
can be used to publish CRLs to an LDAP directory.
Value
crl
yes
LdapCrlMap
LdapCrlPublisher
Description
Specifies the type of certificate that
will be published. Select from the
pull down menu.
Specifies a predicate for this
publisher.
Select to enable.
Specifies the mapper used with this
rule.
See "LdapCrlMap," on page 615 for
details on this mapper.
specifies the publisher used with this
rule.
See "LdapCrlPublisher," on page
608 for details on this publisher.