Red Hat CERTIFICATE SYSTEM 7.1 - ADMINISTRATOR Administrator's Manual page 666

Cloning the Online Certificate Status Manager
In order for these fields to be populated properly, you have to have already copied over
the appropriate certificates from the master CA. If you do not see certificates in the
pull-down menus, follow the instructions in Step 2 above to copy the key and
certificate database material over correctly.
Once the configuration for the clone is done, the cloned Online Certificate Status Manager
will be available in the Red Hat Console. Follow the instructions in the next section to
verify that the clone and the master Online Certificate Status Managers have been properly
configured to work together.
Also, it should be understood that any configurations made to a master OCSP Responder
will also need to be setup in each cloned OCSP Responder. The only two exceptions to this
rule are the Users and Groups and the Access Control Lists, both of which are provided
through the CS console.
666 Red Hat Certificate System Administrator's Guide • September 2005