Enabling Publishing - Red Hat CERTIFICATE SYSTEM 8.0 - ADMINISTRATION Admin Manual

Predicate Type
Table 8.3. Predicate Expressions

8.2.5. Enabling Publishing

Publishing can be enabled for only files, only LDAP, or both. Publishing should be enabled after
setting up publishers, rules, and mappers. Once enabled, the server attempts to begin publishing.
If publishing was not configured correctly before being enabled, publishing may exhibit undesirable
behavior or may fail.
NOTE
Configure CRLs. CRLs must be configured before they can be published. See
Revoking Certificates and Issuing
1. Log into the Certificate Manager Console.
pkiconsole https://server.example.com:9445/ca
2. In the Configuration tab, select Certificate Manager from the navigation tree on the left. Select
Publishing.
The right pane shows the details for publishing to an LDAP-compliant directory.
3. To enable publishing to a file only, select Enable Publishing.
4. To enable LDAP publishing, select both Enable Publishing and Enable Default LDAP
Connection.
Figure 8.14. Enabling Publishing
In the Destination section, set the information for the Directory Server instance.
Predicate
To publish certificates based on the profile used to issue them, set profileId==
CRLs.
Enabling Publishing
Chapter 6,
221