Webasto Thermo Pro 50 Eco Operating Instructions Manual

Operating instructions
Thermo Pro 50 Eco
Introduction
Dear Webasto Customer,
Thank you for purchasing the Thermo Pro 50 Eco water heater from Webasto. We hope that
you will find it gives you reliable comfort for years to come.
The heater Thermo Pro 50 Eco works together with the vehicle's heating system to preheat the
cab and engine in parking heating mode.
Regular use of the heater can provide the following advantages:
– Improved safety thanks to clear all-round vision from the moment you move off.
– Reduced wear and cold-start emissions thanks to engine preheating.
– Achieving the comfort temperature even with engines with low waste heat thanks
to the Heating during Travel option.
– Comfort temperature is reached automatically and in an energy-saving way in
vehicles with start/stop system thanks to corresponding heater integration (engine-off
integration).
Equipment for hazardous material vehicles (ADR):
The ADR function is provided depending on the equipment.
We assume that the operation and function has been explained to you by the installing work-
shop/service point to your complete satisfaction. In these operating instructions we would like
to once again provide you with an overview of safe use of the heater.
In order to become familiar with and understand all functions of the heater,
you must read this operating instructions carefully.
This ensures that you will be able to use all functions to your satisfaction and
will feel safe and completely at ease with its operation.
In case of loss, please contact an authorised Webasto dealer immediately for
a replacement document.
Repair or maintenance work not described in this manual may only be
carried out by an authorised Webasto dealer.
Note
Hazardous material vehicles may not be fitted with programmable
or remote-controlled control elements.