Page 2
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: DO NOT RETURN TO STORE...
Make sure you have all necessary parts by checking the diagram and · parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. Turn off the hot and cold water supply at the angle stops and turn on ·...
Page 4
Diagram and Parts List Faucet Body Aerator Faucet Base A. Base Trim Ring B. Rubber Washer Mounting Hardware A. Rubber Washer B. Metal Washer C. Mounting Nuts D. Mounting Screws Hex Wrench Aerator Key...
Faucet Dimensions 6 5/8" (168mm) 3 3/4" (96mm) 20° 5 3/4" Ø 1 3/4" (146mm) (45mm) 1 3/8" (35mm) Ø 2" (50mm) 3/8" Compression Installer Tip: Shut off main water supply before installing new faucet.
Page 6
Faucet Installation Procedure Step 1. Remove rubber washer (4A), metal washer (4B), mounting nut (4C), and mounting screws (4D). Keep the base trim ring (3A) and rubber washer (3B) on the base of the faucet. Step 2. Install the faucet through the 1-3/8"...
Page 7
Step 3. Install flex water supply lines on the angle stops and tighten with an adjustable wrench. Turn on both the cold and hot main valves Apply pipe tape (optional). Step 4. After installing the faucet, remove the aerator (2) with the included aerator key (6).
Trouble-Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under the faucet Adjusting locking nut has come loose. Remove handle index button. Loosen set screw with hex wrench.
Page 10
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.
Page 11
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to date comprehensive warranty, go to www.kraususa.com/warranty...
Page 12
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...
Page 13
Proservice@kraususa.com "Bathroom Accessories" in their original you for your business with Kraus USA. It is our damages, and Kraus accepts no liability for such location. The warranty is non-transferable. sincere hope that you are completely satisfied If you are an Authorized Partner please contact damages.
Page 14
DIMENSIONS STEP 2 STEP 4 PU-10 DIAGRAM AND PARTS LISTS Install drain body (a), with rubber washer (b) Connect tailpipe (g) to p-trap. PU-L10 Ø 2 5/8" attached, into the drain hole. From underneath, (66.5mm) attach concave washer (c) (narrow end up), plastic washer (d) and mounting nut (e) to drain Ø...
Need help?
Do you have a question about the Ramus FVS-1007-PU-10 and is the answer not in the manual?
Questions and answers