Related Manuals for Kraus Sheven FVS-1002
Summary of Contents for Kraus Sheven FVS-1002
- Page 1 INSTALLATION MANUAL Sheven Single Lever Vessel Faucet FVS-1002 www.kraususa.com Toll Free: 1.800.775.0703 © 2018 Kraus USA Inc. REV. July 20, 2020...
- Page 2 Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com...
-
Page 3: Prior To Installation
Prior to Installation: · Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. · Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. - Page 4 Diagram and Parts List 1. Faucet Body 2. Base Trim Ring 3. Base O-Ring 4. Rubber Washer 5. Metal Washer 6. Mounting Nut 7. Mounting Screws (2) 8. Hot & Cold Waterlines (2) 9. Manual...
-
Page 5: Faucet Dimensions
Faucet Dimensions 4 5/8" (348mm) 60° 4 1/4" (109mm) Ø 2" (52mm) Ø 1 1/4 1 3/8" (33mm ~ 35mm) 3/8" Compression Installer Tip: Shut off main water supply before installing new faucet. - Page 6 Faucet Installation Procedure Step 1. Remove rubber washer (4), metal washer (5), mounting nut (6) and mounting screws (7). Keep the base trim ring (2) and base O-ring (3) on the base of the faucet. Step 2. Screw and hand-tighten the hot and cold waterlines (8) into the faucet body (1), hot side left &...
- Page 7 Step 3. After adjusting the direction of the faucet body (1), tighten the mounting nut (6) until snug and then tighten the mounting screws (7) to the nut with a Phillips head screw driver until snug. Step 4. Connect hot and cold waterlines (8) to the angle stops and tighten with a wrench.
-
Page 8: Replacement Parts
Replacement Parts Replacement Parts List Finish/Color Part # 1. Aerator Cover CH, BN, ORB* KP12178 2. Aerator KP12179 3. Handle Assembly CH, BN, ORB* KP12176 CH, BN, ORB* 4. Cartridge Cover KP12184 5. Cartridge Nut KP12185 KP12171 6. Cartridge CH, BN, ORB* 7. -
Page 9: Troubleshooting
Trouble-Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Adjusting locking nut has come loose. Remove handle index button. Loosen set Leakage under the faucet screw with hex wrench. - Page 10 Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.
- Page 11 This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to date comprehensive warranty, go to www.kraususa.com/warranty...
- Page 12 IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...