Kraus FVS-1007 Installation Manual

Kraus FVS-1007 Installation Manual

Ramus single handle lavatory faucet
Hide thumbs Also See for FVS-1007:

Advertisement

I N S TA L L AT I O N MA N UA L
Ramus Single Handle Lavatory Faucet
FVS-1007
www.kraususa.com I
toll free: 1.800.775.0703 I © 2013-2014 Kraus USA Inc.

Advertisement

Table of Contents
loading

Summary of Contents for Kraus FVS-1007

  • Page 1 I N S TA L L AT I O N MA N UA L Ramus Single Handle Lavatory Faucet FVS-1007 www.kraususa.com I toll free: 1.800.775.0703 I © 2013-2014 Kraus USA Inc.
  • Page 2 Congratulations on your new Kraus purchase! We would like to take this opportunity to thank you for your business with Kraus USA. It is our sincere hope that you are completely satisfied with your Kraus experience. We welcome any questions or comments you may have, and look forward to assisting you in the future.
  • Page 3: Included Parts

    (96mm) (10mm) 7/8” 10 1/8” 8 5/16” 12 7/16” 7/8” 10 1/8” 8 5/16” 12 7/16” (22mm) (257mm) (21mm) (316mm) (22mm) 19.7 º (257mm) (21mm) (316mm) 19.7 º BEFORE INSTALLATION 1 15/16” ∅ 1 15/16” ∅ Check to make sure you have the following parts: 50mm) 1 3/8”...
  • Page 4: Safety Tips

    Safety Tips • If soldering the water connections when installing the faucet, remove the O-rings, cartridges, and washers before applying any heat • Protect your eyes with safety glasses when cutting or soldering 3 5/8” (168mm) 3 3/4” 3/8” Faucet Installation Procedure (96mm) (10mm) 3 5/8”...
  • Page 5 1 15/16” ∅ 50mm) ∅ Step 1 1 5/8” (42.5 mm Max) Remove rubber washer (8A), metal washer (8B), mounting nut (8C), and mounting screws (8D). Keep the base trim ring (7A) and rubber washer (7B) on the base of the faucet 9/16”-18UNEF Step 2...
  • Page 6 Step 3 Install flex water supply lines on the angle stops and tighten with an adjustable wrench. Turn on both the cold and hot main valves Apply pipe tape (optional) Step 4 After installing the faucet, remove the aerator (6) with the included aerator key (10).
  • Page 7 Replacement Parts Keep this manual for ordering replacement parts. 1. (A) Index Button (B) Set Screw 2. Metal Handle 3. Trim Cap 4. Locking Nut 5. Ceramic Disc Cartridge 6. Aerator 7. Mounting Hardware (A) Base Trim Ring (B) Rubber Washer 8.
  • Page 8: Troubleshooting

    Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: P R O B L E M C A U S E A C T I O N Leakage under the Adjusting locking nut Remove handle index...
  • Page 9: Care And Maintenance

    Hot Water Care & Maintenance *To keep the product clean & shining, follow the steps below: Rinse with clean water & dry with a soft cloth Do not clean with soaps, acid, polish, abrasives, or harsh cleaners Do not use a cloth with a coarse surface Unscrew the aerator and clean when necessary *This installation manual is subject to change without further notice.
  • Page 10: Conditions And Exclusions

    If Kraus is unable to provide a replacement and repair is not practical or cannot be made in timely fashion, Kraus may elect to refund the purchase price in exchange for the return of the product.
  • Page 11 NON-APPLICABILITY OF THIS WARRANTY By the purchase and use of our products, you agree that Kraus is not liable for incidental, consequential or special damages associated with the return, replacement, installation or use of your product. This includes freight costs,...
  • Page 12 www.kraususa.com...

Table of Contents