Displaying And Editing Plc Properties; Displaying Plc Properties; Resetting The Processing Time; Loading Modified Plc User Program - Siemens SINUMERIK 828 Operating Manual

Editing the PLC user program
20.2 Displaying and editing PLC properties
20.2

Displaying and editing PLC properties

20.2.1

Displaying PLC properties

The following PLC properties can be displayed in the "SIMATIC LAD" window:
• Operating state
• Name of the PLC project
• PLC system version
• Cycle time
• Processing time
The processing time can be reset.
You can also update the project data or load a new PLC user program.
Procedure
20.2.2

Resetting the processing time

You can reset the processing time of the PLC user program.
Procedure
20.2.3

Loading modified PLC user program

Load the project data to the PLC if some changes have been made to the project data and a new
PLC user program is available.
426
1. Select the "Start-up" operating area.
2. Press the "PLC" softkey.
The ladder diagram representation opens and displays the PLC informa‐
tion.
1. The Ladder editor is open.
2. Press the "Reset proc. time" softkey.
The data of the processing time is reset.
Operating Manual, 07/2024, A5E48383617B AG
Universal