Crestron CNX-B2 Operations & Installation Manual
  1. Manuals
  2. Brands
  3. Crestron Manuals
  4. Keypad
  5. CNX-B2
  6. Operations & installation manual
Crestron CNX-B2 Operations & Installation Manual

Crestron CNX-B2 Operations & Installation Manual

Single gang keypads
Hide thumbs Also See for CNX-B2:
Table of Contents

Advertisement

Quick Links

Download this manual
Crestron CNX-B2/B4/B6/B8/B12
Single Gang Keypads
Operations & Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CNX-B2 and is the answer not in the manual?

Questions and answers

Related Manuals for Crestron CNX-B2

Summary of Contents for Crestron CNX-B2

  • Page 1 Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Operations & Installation Guide...
  • Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2003 Crestron Electronics, Inc.

  • Page 3: Table Of Contents

    Industry Compliance..............7 Setup....................7 Network Wiring ..............7 Identity Code .................8 Installation ................12 Programming Software ..............14 Programming with Crestron AppBuilder or D3 Pro ....15 Programming with SIMPL Windows........15 Programming with VT Pro-e ..........21 Uploading and Upgrading..............22 Communication Settings............23 Uploading a SIMPL Windows Program......27 Uploading a VT Pro-e WAV File Project ......28...

  • Page 5: Single Gang Keypads: Cnx-B2/B4/B6/B8/B12

    CNX-B2/B4/B6/B8/B12 Introduction Features and Functions The CNX-B2/B4/B6/B8/B12-series Single Gang Keypads are wall- ® mounted user interfaces that can be part of a Crestron solution total ® control system. The keypads are standard Cresnet devices, and provide fingertip control when the control system is properly programmed using SIMPL Windows.
  • Page 6 NOTE: The CNX-B12 keypad is supplied with 12 blank pushbuttons. As an option, custom-engraved keys can be designed and obtained by using the Crestron Engraver software. Version 2.0.1.5 or later is available from the Downloads | Software Updates section of the Crestron website (www.crestron.com).

  • Page 7: Specifications

    2. Sensor reads temperature in degrees Centigrade; keypad firmware converts reading to Fahrenheit. 3. The button panel can store up to 101 wav files that produce a total maximum of approximately 60 seconds playback. Single Gang Keypads: CNX-B2/B4/B6/B8/B12 • 3 Operations & Installation Guide - DOC. 8173A...

  • Page 8: Physical Description

    Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 4. The latest software versions can be obtained from the Downloads | Software Updates section of the Crestron website (www.crestron.com). Refer to the NOTE following these footnotes. 5. Crestron 2-Series control systems include the AV2, CP2/CP2E, MP2/MP2E, PAC2, PRO2 and RACK2.
  • Page 9 NOTE: Illustration is for 12-button keypad, other models have fewer buttons. Button numbers are for programming purposes only. Refer to the illustrations on page 19 for more button arrangement details. Single Gang Keypads: CNX-B2/B4/B6/B8/B12 • 5 Operations & Installation Guide - DOC. 8173A...
  • Page 10 24 Y Z G Rubber Membrane Indicator LED Installation View Single gang electrical box (2.5 in. depth recommended) Button unit Removable buttons Faceplate LED window 1 in. pan head Divider 6 • Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC. 8173A...

  • Page 11: Industry Compliance

    CAUTION: Use only Crestron power supplies for Crestron equipment. Failure to do so could cause equipment damage or void the Crestron warranty. CAUTION: Provide sufficient power to the system. Insufficient power can lead to unpredictable results or damage to the equipment.

  • Page 12: Identity Code

    For example, a Cresnet run using 18 AWG Crestron Certified Wire and drawing 20 watts should not have a length of run more than 333 feet. If Cresnet HP is used for the same run, its length could extend to 1250 feet.
  • Page 13 NET IDs are definition of Viewport. changed from a personal computer (PC) via the Crestron Viewport. NOTE: For detailed information on establishing communication between the PC and control system, refer to “Communication Settings”...
  • Page 14 Cresnet system or when such devices are being added/replaced. Ensure that all keypads are connected to the control system. Open the Crestron Viewport version 3.35 or later. 10 • Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC. 8173A...
  • Page 15 TSID but not the serial number, do the following: Open the Crestron Viewport. From the Viewport menu, select Functions | Serial Number TSID Conversion Tool. The “Serial Number TSID Conversion Tool” window is displayed. Single Gang Keypads: CNX-B2/B4/B6/B8/B12 • 11 Operations & Installation Guide - DOC. 8173A...

  • Page 16: Installation

    Connect the Cresnet cable with supplied mate to the keypad’s Cresnet port and the other end to the control system. Insert insulation in electrical box (make sure it fills void of box not occupied by keypad). 12 • Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC. 8173A...
  • Page 17 You can also compensate for heat from the backlight, but this may result in a larger inaccuracy after a change in backlight state until the unit reaches a steady-state temperature. Single Gang Keypads: CNX-B2/B4/B6/B8/B12 • 13 Operations & Installation Guide - DOC. 8173A...

  • Page 18: Programming Software

    Once related Crestron Appbuilder creates the project, the system interfaces and suggestions program logic can be customized. It can easily be modified with Crestron and/or ® complaints to development tools (i.e., SIMPL Windows and Crestron Vision Tools Crestron via Pro-e (VT Pro-e) software packages).

  • Page 19: Programming With Crestron Appbuilder Or D3 Pro

    Crestron D3 Pro similarly offers automatic programming for lighting, HVAC, and security. Both Crestron AppBuilder and D3 Pro are fully integrated with Crestron's suite of software development tools, including SIMPL Windows, VT Pro-e, and the Crestron Database. Both access these tools behind the scenes, enabling you to easily create robust systems.
  • Page 20 Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 a number of workspaces (i.e., windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar ® Windows environment. This section explains how to create a SIMPL Windows program that includes a single gang keypad.
  • Page 21 Settings” window. This window displays CNX-B12 device information. The NET ID can be changed in this window using the NET ID tab, as shown in the following figure. CNX-B12 Device Settings Window Single Gang Keypads: CNX-B2/B4/B6/B8/B12 • 17 Operations & Installation Guide - DOC. 8173A...
  • Page 22 The following graphic shows the CNX-B12 symbol in the SIMPL Windows Programming Manager. CNX-B12 symbol in SIMPL Windows Programming Manager 18 • Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC. 8173A...
  • Page 23 For example, a CNX-B8 has press1-8 and fbck1-8 only in its symbol. The illustration below shows the button arrangement for the keypads Button Arrangement of CNX-B Series Keypads (Front Views) Single Gang Keypads: CNX-B2/B4/B6/B8/B12 • 19 Operations & Installation Guide - DOC. 8173A...
  • Page 24 Refer to the VT Pro-e help file for more information. To create additional sound symbols in SIMPL Windows, right click on the CNX-B12 symbol and select Insert Symbol/Parameter Field (alternatively, select Alt +). 20 • Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC. 8173A...

  • Page 25: Programming With Vt Pro-E

    NOTE: The join assignments for panels with fewer than 12 buttons and feedback LEDs do not change. Example Program An example program for the keypad is available from the Crestron FTP site (ftp://ftp.crestron.com/Examples). Search for CNX-B12.SMW. Programming with VT Pro-e The CNX-B12 is capable of playing audio messages as system prompts and responses.

  • Page 26: Uploading And Upgrading

    (page 8) or after installation (page 12). Uploading and Upgrading Assuming a PC is properly connected to the entire system, Crestron programming software allows the programmer to upload programs and projects to the system and touchpanel and/or keypads after their development.

  • Page 27: Communication Settings

    All of these functions are accessed through the commands and options in the Viewport menus. Therefore, for its effectiveness as a support and diagnostic tool, the Crestron Viewport may be preferred over development tools when uploading programs and projects.
  • Page 28 Guide (Doc. 6052) or the respective Operations Guide for the control system. These documents are available from the Downloads | Product Manuals section of the Crestron website (www.crestron.com). Refer to the figure below for a typical connection diagram when uploading files.
  • Page 29 “Port Settings” window are selected as shown after this step. Click the OK button to save the settings and close the window. Single Gang Keypads: CNX-B2/B4/B6/B8/B12 • 25 Operations & Installation Guide - DOC. 8173A...
  • Page 30 COM port and baud rate. If communication cannot be established, refer to the “Troubleshooting Communications” section in the respective Operations Guide for the control system. 26 • Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC. 8173A...

  • Page 31: Uploading A Simpl Windows Program

    Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Uploading a SIMPL Windows Program A control The SIMPL Windows file can be uploaded to the control system source system using SIMPL Windows or via the Crestron file has the extension Viewport. .smw. A compiled...

  • Page 32: Uploading A Vt Pro-E Wav File Project

    Uploading a VT Pro-e WAV File Project The CNX-B12 The VT Pro-e project file can be uploaded to the keypad using keypad source VT Pro-e or via the Crestron Viewport. file has the extension .vtp. A compiled VT Upload via VT Pro-e...
  • Page 33 “Select Network ID” Window NOTE: When transferring any Cresnet file (keypad project/firmware), lower the port speed baud rate to 38400 to match the Cresnet bus speed. “Open” Window Single Gang Keypads: CNX-B2/B4/B6/B8/B12 • 29 Operations & Installation Guide - DOC. 8173A...

  • Page 34: Firmware Upgrade

    (http://www.crestron.com/downloads/software_updates.asp) for the latest version of firmware. Not every product has a firmware upgrade, but as Crestron improves functions, adds new features, and extends the capabilities of its products, firmware upgrades are posted. To upgrade the firmware, complete the following steps.
  • Page 35 ‘b’ file is loaded automatically. Browse to the desired [filename]a.csf file and click Open to begin the transfer. The program automatically sends the ‘a’ file and then the ‘b’ file. Single Gang Keypads: CNX-B2/B4/B6/B8/B12 • 31 Operations & Installation Guide - DOC. 8173A...

  • Page 36: Serial Number Assignment

    NOTE: Do not select the Broadcast check box unless your device is the only device of its type on the network. Click Send to store the serial number and NET ID information into the keypad’s memory. 32 • Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC. 8173A...

  • Page 37: Problem Solving

    Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. Keypad Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Keypad does not Incorrect power supply.

  • Page 38: Further Inquiries

    Crestron website (http://www.crestron.com/) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features.

  • Page 39: Software License Agreement

    This Agreement may only be modified by a writing signed by an authorized officer of Crestron. Updates may be licensed to You by Crestron with additional or different terms. This is the entire agreement between Crestron and You relating to the Software and it supersedes any prior representations, discussions, undertakings, communications or advertising relating to the Software.
  • Page 40 “applets” incorporated into the Software), the accompanying media and printed materials, and any copies of the Software are owned by Crestron or its suppliers. The Software is protected by copyright laws and international treaty provisions. Therefore, you must treat the Software like any other copyrighted material, subject to the provisions of this Agreement.

  • Page 41: Return And Warranty Policies

    Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended or if it has been subjected to misuse, accidental damage, modification or improper installation procedures.
  • Page 42 Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 This page is intentionally left blank. 38 • Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC. 8173A...
  • Page 43 Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads This page is intentionally left blank. Single Gang Keypads: CNX-B2/B4/B6/B8/B12 • 39 Operations & Installation Guide - DOC. 8173A...
  • Page 44 Crestron Electronics, Inc. Operations & Installation Guide - DOC. 8173A 15 Volvo Drive Rockleigh, NJ 07647 (2002192) Tel: 888.CRESTRON 03.03 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

This manual is also suitable for:

Cnx-b4Cnx-b6Cnx-b8Cnx-b12Cnx-b12w

Table of Contents