Table of Contents
Advertisement
Button Properties
The button properties are as follows:
Button Properties
Number
Name
Channel Code
Lock Channel Code for
Menus and Sub Menus
Menu Action
Update
Configuration Options
Display Channel Map
Click Display Channel Map to view a listing of channel codes that have already been assigned within
your active KeypadBuilder file.
Click on any channel code number to see its current allocation.
Channel Information
Channel Code
Assigned To
KeypadBuilder v2.1
This number is dictated by the selected device's firmware and is intended to assist in
navigating the keypad device file.
The button name is for use within KeypadBuilder only and is intended to assist in
developing unique names.
The channel code represents communication out of the panel to the master control-
ler. By default the channel code is the same as the button number. Clicking Auto
Assign takes the next unassigned channel code.
Placing a check in the box locks the selected channel code and prevents it from
being assigned in any other menu or sub menu.
This option only applies to devices equipped with a displays. Assign a button to exe-
cute one of the following:
• Up - Navigate up the menu items.
• Down - Navigate down the menu items.
• Select - Activates the menu selection. The selection can lead to a sub menu or a
channel code activation.
• Home - This button assignment will return the display menu to the top level.
• None - The button has no interaction with the menu system.
Confirms all changes and channel assignments for the selected button.
Blank Buttons - Blank buttons contain no channel code assignment. It is important to assign
blank buttons before the engraving process as they are included in the order.
Combine Buttons - Click Combine Buttons to activate and deactivate. When in combine
button mode, click on a button you wish to combine. Always select the left of the two button
you wish to combine. Combine Buttons takes the button information from the selected button
and assigns it to the button directly to the right of it, thus treating two buttons as one. To
uncombine a button, select the button again. The button on the right retains no information.
Combining buttons adds double buttons to your custom engraving order.
The assigned channel code number.
If used, the item and description of the button using the channel code.
Mio Modero Configuration Modules
15
Advertisement
Table of Contents
