Confirm Delete List Table Dialog Window; Page Configuration Dialog Window - AMX KEYPADBUILDER Manual

Device Channel Allocation:
OK - Accepts changes and closes the window.
Cancel - Closes the window without changes.

Confirm Delete List Table Dialog Window

In the event a table has been selected for deletion, Project > Delete Table, KeypadBuilder will seek
confirmation via this dialog window.
In this dialog is a list of every page view where the selected table occurs.
Click OK to confirm and Cancel to exit without change.

Page Configuration Dialog Window

Both the Mio Modero DMS and Mio Modero DMS Pinnacle behave the same when it comes to editing
the page configuration of keypad pages within a project file. To launch the Page Configuration dialog
window, go to Project > Page Configuration...
The dialog breaks down as follows:
Address and Channel Assignments
By default, KeypadBuilder sets every new page to Address Port: 1, Code: 0; Channel Port 1, Code:0.
See Working With Function Codes for the importance of these function codes.
KeypadBuilder v2.1
Automatically Calculate Port Allocation - Based on the port settings in the KeypadBuilder
project file, ports are allocated to the device.
Specify Port Allocation - Manually establish the number of ports to be allocated to the
device, this feature is necessary with dynamic list boxes that utilize ports.
Ports - A text field for typing in the number of ports to allocate.
Automatically Calculate Channel Allocation - Based on the channel settings in the
KeypadBuilder project file, channels are allocated to the device.
Specify Channel Allocation - Manually establish the number of channels to be allocated to
the device, this feature is necessary with dynamic list boxes that utilize channels.
Channels - A text field for typing in the number of channels to allocate.
Name - By default KeypadBuilder names your new pages incrementally, e.g., Page 4, but it is
a good idea for you to change them to unique names that will aid you in identifying the page's
purpose in your project.
Address Port
Address Code
Channel Port
Channel Code
Page Layout - The Page Layout is the graphic representation of the keypad page. A cross-hair
cursor allows you to select button lines for editing purposes. To select, left-click on an of the
Single Button lines.
Add - Adds either a button line, a double button line or a list box button via the Add Button
Dialog Window. At a minimum, there must be one button line removed from the keypad page.
A double button line requires two adjoining buttons be removed and a list box button will
display within any number set but at least one button must be removed for Add to enable.
Remove - Removes the line currently selected within the Page Layout area.
Make Double - Allocates two button lines to one button. Click on any single button where the
adjoining button has been removed to enable Make Double.
Move Up - Moves the selected button line up the keypad page, over the button before it.
Mio Modero DMS Application Operations
107